K. Well i have a Dremel tool. But I'll get those tools also.I am hoping to just tighten what's there back up.Mishka1965 wrote:Zippy81 wrote:Hey Mishka, my Taylor doll's wrists both need tightening.. Do you think the tools I have planned to get below will suffice for such an endeavor? Thanks.
Looks good. I would get some pliers, wire cutters and similar tools. That hinge bolt may be welded, and you may need a drill to break that weld.
A 1/4" small socket set will be needed.
Let us know how you fair
Mishka
New video - TPE repairs, a comprehensive tutorial
Re: New video - TPE repairs, a comprehensive tutorial
Re: New video - TPE repairs, a comprehensive tutorial
Re: New video - TPE repairs, a comprehensive tutorial
The heating rods need more instructions! My phone charger outputs 5 v at 1 or .7 amps. It is just right, just gets warm. My external battery outputs 5 v at 2.4 amps and gets that warmer HOT! I can't hold it in my hand. I'd never use it on the girls.Bobbay wrote:There is a tricky repair I'd like to do. I've used heating rods in my dolls for years with no issues. The ones from Fleshlight were especially good. But, I got a new, junky one that got so hot that it melted the mouth of a new doll mouth. As you can see, below, her mouth melted around the heat rod. I am curious whether I could improve the situation using a heat gun. Specifically, I am curious whether I can make whole sections of a lip flexible enough to reposition with them hardening into, or close to, the original closed lip position. I am open to using filler material, either melted in or maybe getting a TPE patch kit. I am willing to do some lip coloring, too. Any advice is welcome.
Warning! Test things out first and try to know what output your power source is using!
Also, I have had very good success healing deep cuts on a spare piece of TPE with Mishka'a method. However, I have had 0% success using a soldering iron. I'm a noob to this but the hot air flow is easy and dependable.
I got this. It's awesome. My buddy( own's no doll) has had one for a year or so and uses it all the time.
https://www.amazon.com/F2C-Soldering-Re ... dpSrc=srch
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Pretty awesome video and job!Mishka1965 wrote:Today, finally finished a tutorial on youtube regarding repairing TPE damage. I demonstrate 4 different injuries to TPE that can occur, and how easy you can fix these.
What you need is a hot air gun and a temp IR gun to monitor temps as the TPE melts and anneals. I hope you see that this method works quite well for almost all repairs.
So far I can repair any damage like cuts, nicks, abrasions and skeleton hole thru punctures, etc.. Also groin tears and separation.
I do not cover Vaginal/anal rips where extra material is needed. I can cover this in a future video.
Anyway, give this a go, and you may be real happy with the effort!
Sorry for my accent, I'm not an English native speaker, but I try my best
Enjoy
Mishka
Is there a prayer in hell to fix a torn perineum (area between the vagina and anus)?
- Mishka1965
- Doll Elder
- Posts: 3375
- Joined: Wed Jan 21, 2015 11:37 pm
- Location: USA California
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Mishka
2018-2021 Photographing for JIUSHENG-DOLL,6YE,SinoDoll
2022-2023 Photographer/Reviewer for Zelex, TAYU, MRD and IronTech
Twitter Page: https://twitter.com/Mishka_1965
Instagram Page:https://www.instagram.com/_mishka1965_/
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
This?Mishka1965 wrote:I would use permatex repair (silicone) I use this on occasions where glue or other methods wont work. Give it a go, you may be pleased. This adhesive is acetic acid based substrate and wont react with TPE. It's a secret method we don't talk about much, but works quite well. Just clean the area well with alcohol so it will cure.
Mishka
About ready to try it.
Just tried to melt the two sides back together with very mild heat from a solder iron. Held for a second and then ripped apart again. Thinking I literally need some type of glue. Think this is now beyond melting and putting back together unfortunately.
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
mleecams81 wrote:This? "RTV Silicone Sealant, 3 oz Tube, Red" << sorry put the link put it apparently is not allowed as it got deleted.Mishka1965 wrote:I would use permatex repair (silicone) I use this on occasions where glue or other methods wont work. Give it a go, you may be pleased. This adhesive is acetic acid based substrate and wont react with TPE. It's a secret method we don't talk about much, but works quite well. Just clean the area well with alcohol so it will cure.
Mishka
About ready to try it.
Just tried to melt the two sides back together with very mild heat from a solder iron. Held for a second and then ripped apart again. Thinking I literally need some type of glue. Think this is now beyond melting and putting back together unfortunately.
- haremlover
- Doll Visionary
- Posts: 16238
- Joined: Tue May 26, 2009 12:00 am
- Location: UK and South of France
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Best wishes
Harem
Chloé's book
is available from The-Doll-House
- - - -
Here's Coverdoll Yolanda
- - - -
Reviews for:
-DS-OR-JY-SY-Jarliet-Vivid-SM-SE-ZOne-JM-Sino-Sanhui-Pipedream--XY-WM-Elsa Babe-SM Silicone Siliko-XYcolo-Starpery-Elsa Babe-FutureDoll-Zelex-Irontech-FJ Doll
- - - -
YouTube Doll Review Channel
-https://www.youtube.com/@sexdoll-reviews-
- Mishka1965
- Doll Elder
- Posts: 3375
- Joined: Wed Jan 21, 2015 11:37 pm
- Location: USA California
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
haremlover wrote:Absolutely fantastic. Thanks so much for this. I have forwarded it to two friends
Best wishes
Harem
Thanks,
I took more footage of repairs last few months, and it's time for more videos.
Been doing these repairs quite a bit and I really feel comfortable with the procedure more than ever.
Also, got some pro ideas for makeup and that's for another day.
Mishka
2018-2021 Photographing for JIUSHENG-DOLL,6YE,SinoDoll
2022-2023 Photographer/Reviewer for Zelex, TAYU, MRD and IronTech
Twitter Page: https://twitter.com/Mishka_1965
Instagram Page:https://www.instagram.com/_mishka1965_/
- Alottahope
- Doll Oracle
- Posts: 9304
- Joined: Sat Nov 30, 2013 9:37 am
- Location: In the fortified bunker
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Very well done! Thumbs up for a done deal on this too!
The Masculine of the two sexes
He/Haw/His/Him/Sausage
Purveyor of Doll Porn
The famous are rarely significant and the significant are rarely famous.
If you would like to follow my thread, Alottahope's Family Jewels, here is the link below.
viewtopic.php?t=71344&start=6630
Re: New video - TPE repairs, a comprehensive tutorial
-
- Contributing Poster
- Posts: 48
- Joined: Thu Oct 11, 2018 6:56 am
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
- Broven
- Doll Patriarch
- Posts: 4225
- Joined: Sun Aug 20, 2017 6:26 pm
- Location: The Mitten State
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Just ordered a heat gun and IR sensor. Now that I have a new body coming for my doll, I'm looking forward to trying this out on the old body. Maybe I can get good at it before the new body needs it. lol
I'm also looking forward to your makeup tutorials. Man, am I awful at that...
Thanks for adding this Anung! I noticed in the neck repair portion of Mishka's video that that was what he was appearing to do and was going to ask about that. But your post answered that quite nicelyAnung Un Rama wrote: So you do the heating in the half stressed position with the damage partially open. It is important to ensure the area is also dry and contaminent such as powder free.
Once the heat is applied and the area is sticky and shiny, you then use the limb leverage to return the doll to the neutral unstressed position then feather the surface with the heat gun (rapidly) to smooth the repair and blend it in. By returning the doll to the unstressed position the two tacky semi molten sections of the repair site should then press together natural and start reforming the bond. Once you see this, you can start the blend and smoothing heat application.
"You're my blue sky. You're my sunny day." - Dickey Betts
Anna Marie and Friends (Thindoll 162A-36)
February 2019 Coverdoll photo shoot
- SuperNothing
- Senior Member
- Posts: 329
- Joined: Tue Mar 20, 2018 11:27 am
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
- Mishka1965
- Doll Elder
- Posts: 3375
- Joined: Wed Jan 21, 2015 11:37 pm
- Location: USA California
- Contact:
Re: New video - TPE repairs, a comprehensive tutorial
Mishka
2018-2021 Photographing for JIUSHENG-DOLL,6YE,SinoDoll
2022-2023 Photographer/Reviewer for Zelex, TAYU, MRD and IronTech
Twitter Page: https://twitter.com/Mishka_1965
Instagram Page:https://www.instagram.com/_mishka1965_/