Teeth&Tongue set 2.0 is out!
-
- Senior Member
- Posts: 305
- Joined: Sat Mar 04, 2017 3:19 pm
- Contact:
Re: Teeth&Tongue set 2.0 is out!
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Mike Tango wrote:By the way, Von is a really nice guy.
I don't know if I deserve this but thanks!Fantastic Plastic wrote:And yes VonRubber is a super nice guy.
In France, there is a saying: "Totally useless and therefore rigorously indispensable!" Lol!SeniorDollLover wrote:Outstanding! you have made me want something I didn't even know I needed!
Here are some photos of a Z-OneDoll with head A35 Eva. These were taken by Phil from The-Doll-House. He used the Teeth&Tongue set for some of his shots. Doesn't look too bad!
Considering he did not remove the molded on teeth, the result is quite good. More pictures here:
- Z-OneDoll 160cm Review
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Here are some sexy facial expressions shots I did of my new OR-156H Doll. This is the 023 head.
To be honest, the Teeth&Tongue set didn't fitted very well and I was a little disappointed at first. The inside of the mouth seem to be much tighter on the ORDoll heads than the WM ones. I had to remove the original TPE teeth and some material inside the mouth. Not much, but enough to make room for the inserts.
In the end, I think the T&T 2.0 fits the OR 023 head even better than in the WM #36 one!
By the way, the movable eyelids are from MannequinFan. They made the sexy expressions possible.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
Re: Teeth&Tongue set 2.0 is out!
www.xsdolls.com - 1.800.605.5656 - support@xsdolls.com
Latest Dollcast Video:
XS:DC - S01E04 - Sanhui 156/E Review
- Tyr
- Doll Mentor
- Posts: 1210
- Joined: Mon May 09, 2016 5:06 am
- Location: going off grid (mostly)
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Tyr
The Late, Great, Ian Fraser Kilminster.
My 'e' key is getting sticky, so now and thn words may look a bit odd.
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Thank you very much!xsdolls wrote:This set really looks awesome and brings much more life into TPE dolls.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Tyr wrote:They fit WM head #31 too. Got mine today
Thank you for the pictures. Ami looks really cute!
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
Anyone interested in Vampire and Elf teeth for their TPE Dolls heads?
These are only the prototype parts. I will also have to make new tongues since the normal ones from my Teeth&Tongue set wouldn't fit anymore. What about a snake or split tongue?
I would love to hear your thoughts about this.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- SexTypeThing
- Doll Mentor
- Posts: 1551
- Joined: Wed Aug 27, 2014 9:39 am
- Contact:
Re: Teeth&Tongue set 2.0 is out!
STT
- SexTypeThing
- Doll Mentor
- Posts: 1551
- Joined: Wed Aug 27, 2014 9:39 am
- Contact:
Re: Teeth&Tongue set 2.0 is out!
damn! I didn't noticed that picture but is quiet disturbing but for that tongue you might need two wires so the split tongue can have one up and one downVonRubber wrote:Hello,
Anyone interested in Vampire and Elf teeth for their TPE Dolls heads?
These are only the prototype parts. I will also have to make new tongues since the normal ones from my Teeth&Tongue set wouldn't fit anymore. What about a snake or split tongue?
I would love to hear your thoughts about this.
Von Rubber
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact:
Re: Teeth&Tongue set 2.0 is out!
You got my attention. PM sent.VonRubber wrote:Hello,
Anyone interested in Vampire and Elf teeth for their TPE Dolls heads?
These are only the prototype parts. I will also have to make new tongues since the normal ones from my Teeth&Tongue set wouldn't fit anymore. What about a snake or split tongue?
I would love to hear your thoughts about this.
Von Rubber
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
The tongues are made of resin. It is hard material. I would need to cast two tongues to make one like in the picture and another one with one part up and the other down, or even crossed.SexTypeThing wrote:damn! I didn't noticed that picture but is quiet disturbing but for that tongue you might need two wires so the split tongue can have one up and one down
I'm still in the development phase so it may take a while until these teeth are available. I first wanted to do them for the next Halloween but I can safely say that they will be finished before November.
Any other ideas about the tongues? Maybe different colors: blue, green, black?
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
Re: Teeth&Tongue set 2.0 is out!
Really, impressive. My Sanhui Amelia head did not come with teeth or tongue, and there isn't much space to work with... do you think they would fit? PIC: Thanks,
-Forb
-Abby: 2018 Sanhui 158/Marya
- The Doll Laboratory
- Manufacturer Affiliated
- Posts: 1966
- Joined: Tue May 07, 2013 3:35 pm
- Location: Formerly known as Von Rubber
- Contact:
Re: Teeth&Tongue set 2.0 is out!
I don't see why they wouldn't fit provided the face is oral capable. By the way, I have almost finished version 3.0 and the vampire teeth will be available soon.
Von Rubber
Teeth&Tongue set 4.0 - Add expressions to your Doll
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact: