Misaligned neck tube from the factory -148cm
Re: Misaligned neck tube from the factory -148cm
Supplies:
Craft sticks:
https://www.amazon.com/Perfect-Stix-Jum ... aft+sticks
Surgical scalpels: CAREFUL!!!!! VERY SHARP.
https://www.amazon.com/gp/product/B013L ... PDKIKX0DER
Duct Tape:
https://www.amazon.com/Multi-Use-Duct-2 ... =duct+tape
- Mcupplease
- Doll Elder
- Posts: 2593
- Joined: Wed May 03, 2017 8:05 pm
- Contact:
Re: Misaligned neck tube from the factory -148cm
1. Run a metal probe down alongside the metal spine to check the angle [maybe the whole skeleton is shifted and that rod actually comes up straight].
2. Core out a round cylinder that is centered properly wide enough radius to include the rod. Maybe try 1 or 1.25 in metal conduit pipe put on a grinder to be sharp at it's end.
3. reposition the rod in the big cored hole.
4. repour liquid TPE into the cavity. Does liquid TPE exist? Does it only cure with heat?
Disclaimer: clearly I'm just guessing / brainstorming here only.
OR161K(3,800cc) ... JY140(3,460cc) ...
CP-Breastforms-KK(3,000cc) ... SM175L(2,900cc) ...
SH165R(2,850cc) ... JY150L(2,800cc) ...
SY167L-x2(2,600cc) ... SM150L(2,550cc) ... CLM-Torso(2,300cc) ... Ruby13 XXX BreastPillow(2,000cc)
- Booty Call Dolls
- VENDOR
- Posts: 23824
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
Re: Misaligned neck tube from the factory -148cm
This warrants a replacement doll NOT some bottle of glue.
Were you sent factory photos?
Is this Doll a Jelly New for sure?
Get me that answer and I will do my best to help you get what you paid for, but I need to know exactly where you got her from before I stick my neck out for you, fair enough?
Why not tell your agent who is that you want her refund you $300 to have the doll shipped and repaired by Samara78?
IMHO, you are being taken advantage of.
V/r
BCD
Re: Misaligned neck tube from the factory -148cm
I have the same problem . trying to screw in the head damages the neck and chin of head.
Neck bolt attatchment is off center approx 30% direction 2 o clock when facing body.
Before i made the order :
i asked if seller was a factory - they say yes.
i asked if seller was a assembler shop - they say no we are a factory.
i asked if they where a callcenter for sales - no they said we are a factory.
The seller use a CE certificate from a TDF approved factory, when i ask why they sell in different name and have other address - the answer is we are the same company and same factory.
Sent a video to seller demonstrating the problem with the missaligned neck bolt, they say i am to blame - my answer to them is that i did not mould the TPE to the skeleton, the factory did so it can not be me.
The neck TPE has cracks and chin of head also and as the tread creators doll, the right chin is bulging, i need to use lots of babyoil and hold access neck TPE hard to get to a point where i feel it hurts to much and have to stop.
Please advise
thanks
Re: Misaligned neck tube from the factory -148cm
This is sold to me from a trading company at alibaba that shows a CE Certificate of a TDF approved manufacturer.
Q : Can you se anything wrong with it ...
I suspect it did not pass QC at manufacturer and was sold to black market or its a counterfeit.
thanks
Re: Misaligned neck tube from the factory -148cm
Re: Misaligned neck tube from the factory -148cm
Re: Misaligned neck tube from the factory -148cm
The china scam tactic return at Your cost is no longer viable ...
V
Re: Misaligned neck tube from the factory -148cm
Me, I'd try and cut material out more towards center. Now anyone who has cut TPE knows it's not the easiest material to cut. Esp. straight.
Make a half pipe out of, uh, pipe Could it be made as long as neck? a few inches may be all that's needed
cut out neck TPE towards center. once you have it cut. move neck as best to center as possible. wedge your half pipe in opposite of direction you moved neck...
Fill any voids with the tpe you cut out. May even be able to hide the half pipe with it.
Best solution though?
Bug the hell outta the people who sold this doll to you!!! and get replacement or refund.