sexyrealsexdolls.com

Easy DIY giant 24Kg/52lb ultra soft breasts in less than 99$

Doll stands, props and other doll accessories, inserts, and sex toys.
Post Reply
User avatar
2min2sunset
Contributing Poster
Contributing Poster
Posts: 36
Joined: Wed Oct 22, 2008 12:00 am
Contact:

Easy DIY giant 24Kg/52lb ultra soft breasts in less than 99$

Post by 2min2sunset »

Tired of the firm Silicone/TPE breast out there ?
Looking for giant and soft breasts toy but it is too expansive ?

Than this post is for you!

Here I will explain my DIY way to enjoy ultra large and soft breast that can even fold into your pocket :)
This is the final result:


So, what you need to buy ?
-------------------------------
1. Thick 4ft/48inch balloons
https://www.aliexpress.com/item/32841448472.html
2. food clips
https://www.amazon.com/gp/product/B01KS5U7TK/
3. 6xl T-Shirt (4/5xl will also might work)
https://www.aliexpress.com/item/1005002369957412.html
4. Talcum powder
5. Hot shower water or a thicker viscosity liquid.

Ok, you have all the materials ?
-------------------------------------
1. take the two balloons to the shower.
Fill one balloon with hot shower water. (higher than 36c/97f lower than 48c/118f)
Since the balloons are very big do not over fill them.
Take my word here, they are going to be giant even without over fill them.
Another disadvantage of over filling is that stretching the balloon skin might tear them up.
Just filling them without stretching will make each one to wight around 12Kg/26lb.
This is because each balloon can contain without a problem around 12L (12,000cc). maybe even 14L.
1 Liter = 1 Kg

2. close the balloon opening with two food clips. (in total you use 4 food clips)
make sure you do it well and tight.
do not close the food clip on the balloon skin wrinkles. flat the skin.
why using two food clips ? well, the second is for safety...
do 1 & 2 for the second balloon.

3. use a blanket or a large towel to carry the balloons around.
Place the balloons inside the T-Shirt.

4. have some good time. take some pictures and show us the results :)

5. Take the balloons back to the shower. take off the food clips and spill out the water.
Turn the balloons inside-out and clean the remaining water with towel and talcum powder.
Turn them inside-out to the original condition and repeat the cleaning again.

6. fold everything back to your pocket :)


:multi: :multi: :multi:


Here is some more information for advance DIY users:

nipples
--------
You can use some nipples from aliexpress to make it more realistic...
I am having problems stick them well into the balloons.
If you will look closely the balloons already have some interesting nipples shape at the top...
Found an interesting way to make nipples ? please let us know.


Titfuck
--------
Put you favorite onahole between them.


Other balloons
---------------
You might want to use these 36 inch balloons as well. However they have a very thin skin.
Use two balloons, one inside the other, to achieve thicker skin. However they will start to be firm if too over filed.
Just try to find a good balance here...
72 inch balloons might be too big and heavy to handle... (only for the brave ones)
Super giant wobble water balloon, never tried it, let us know if you used it
https://www.aliexpress.com/item/1005002763063081.html


Skin softness and liquid viscosity
-----------------------------------
After reading some medical articles I found out that breasts fat is not measured using the Shore scale for softness but rather using liquid viscosity.
Why am I mumbling about that ?
Silicone and TPE are rubbers. Their softness is measured using the Shore scale for softness.
They are also solid. Solid materials have a very very high viscosity. For example 200,000 and above.
Breasts fat is measured using viscosity. Its viscosity is more around 15,000 like sour cream for example.
Water viscosity is 1.
In addition silicone and TPE have memory of its initial shape while liquid don't.
Real breasts clearly don't have any memory for their shape and they get their shape from gravity force.
The human skin softness is measured in Shore A scale and it is around 10.
This now make sense why silicone and TPE are problematic to simulate breasts.
The silicone and TPE gels inside the breasts have a very soft Shore value.
It is so soft that it has a new scale - Shore00 or even Shore000. However it is still not liquid.
Therefor it will be very soft but it will still be a solid gel and will bounce badly into its original shape.
So the perfect breasts should be made from a 2mm ShoreA 10 silicone skin with around 15,000 viscosity liquid filling.
I don't think it can be made from TPE since TPE has many microscopic holes. Maybe it can ? I don't know.
The water will go out through the holes just like a normal TPE that spill out mineral oil.
Silicone is water resist and it can be the perfect material for this.
For example, you can use for a skin a ready to use ShoreA10 Smooth-on platinum silicone.
Another example is ShoreA10 Dragon Skin platinum silicone.
If you wish to keep using water with low viscosity you can compensate it by making the skin thicker or lest soft.
Finding the best balance between skin softness, skin thickness and the liquid viscosity is the holly grail.
Sorry if what I said is not 100% correct... It is just what I was reading.
Please fell free to add some more information about this.


The S-Cup/X-Cup breasts ?
-------------------------------
I saw here on the forum and on aliexpress some silicone breasts forms that are filled with cotton.
Maybe they can be filed with water ?
Never tried it. If you did tried let us know...


How balloons are made
---------------------------
https://www.youtube.com/watch?v=_asrhvc4dPg


Creating breasts using silicone skin and gel
-------------------------------------------------
https://www.youtube.com/watch?v=VLyVnrejaHQ


creating simple breast forms
--------------------------------
https://www.youtube.com/watch?v=BSZbzlC57oc


shore scale and silicone
---------------------------
https://www.youtube.com/watch?v=eBO-6DZ_gHk


shore scale and TPE
-----------------------
https://www.youtube.com/watch?v=W3bcT0rHTa0


painting silicone
-------------------
https://www.youtube.com/watch?v=II_3V0kPnwY


The "Breast" Machine
-------------------------
https://www.youtube.com/watch?v=bD2DNSt8Wb4


The perfect boobs toy
-------------------------
As I mentioned before, an amazing artificial breasts should have a 2mm skin with ShoreA 10 softness.
The filling should be a 15,000 viscosity liquid or hot shower water (available everywhere).
Should feel warm (36c/97f)
Some good puffy nipples...
Some nice veins and skin artwork...
Easy to maintain
Fold into your pocket :)
Have something to add ? let us know...
Attachments
set_is_open.jpg
set_is_open.jpg (513.97 KiB) Viewed 4884 times
balloon1.jpg
balloon1.jpg (779.16 KiB) Viewed 4884 times
full_size.jpg
full_size.jpg (859.38 KiB) Viewed 4884 times
set_is_packed.jpg
set_is_packed.jpg (1.72 MiB) Viewed 4884 times

User avatar
Mr Franz
Doll Visionary
Doll Visionary
Posts: 12953
Joined: Wed Mar 15, 2017 1:09 pm
Contact:

Re: Easy DIY giant 24Kg/52lb ultra soft breasts in less than

Post by Mr Franz »

Reminds me of one of my grandnephew's birthday parties. I hung two balloons on the door and since they were green I told him they were Martian titties! 0X

Post Reply

INFORMATIONS