Meet Evie, my new Custom Hongyi Girl
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Meet Evie, my new Custom Hongyi Girl
After having had tons of fun with my DEMI doll, I started to yearn after something different again. Make no mistake: that doll was fantastic to have sex with, but she had lost a bit of magic to me somehow. I wanted a pure inflatable doll that would look like a real woman as close as was reasonably possible without breaking the bank, and in the most 'universally useful pose' as possible.
So after having seen Daz3D been referenced here a few times, I decided to give it a try and 'just design something' without the intention to really go and order it. Soon I realised Daz3D was the perfect tool to design woman-like dolls to your exact measurements, and to the exact pose you want!
And so, I ended up with this model:
And of course after having designed something like that (well an earlier version anyway at that time), I couldn't resist any longer and got in talks with Ava from Hongyi (hongyi8@foxmail.com). My requirements must have been a bit to specific, because the first quote she gave me I really couldn't afford! Perhaps they would also try to model the fingers or do a fully photorealistic print? No idea really, but we settled for something a bit more affordable
They're a Chinese company, so English is not their first language, but they certainly do their best! But still something to bear in mind when working with them: better use clear pictures than trying to explain in words to avoid any confusion! Anyway, they got to their drawing board with my Daz3D renders, and already the day after, their design was ready!
I dreaded opening the files, because I feared it would be a completely dumbed-down version of my design, but no, this was what they'd made:
I was over the moon! Even the face looked like the photo-version I'd sent them! I feared they would have made a cartoon-version of it like what happened on my DEMI doll, but no, it looked fantastic!
After a minor tweak (dark rings around the nipple-valves to give them areolas) I told them to go ahead with production. And then the long wait began... which turned out not to be that long after all: after about 2 weeks she was finished!
Again I dreaded opening the pictures they sent, because I feared she wouldn't look like the design at all. But again, all my fears were totally unnecessary: she looked almost exactly as designed! I could hardly believe it, these guys are good!
And then the second part of the wait began... about a week later, she was in my possession!
Immediately upon opening the package and getting her out of the wrapping, I knew this doll was something different... I felt like a little kid opening a Christmas present he's been waiting a whole year for!
After inflating her, I was completely blown away (haha)! Finally I think I have the doll I have been looking for for years (but I said that already last time )!
So here's my review:
Looks
Mind-bogglingly good for a pure inflatable! The face is a photo-realistic print of a transparent PNG file I sent them. I was not sure if they'd use it as is, or 'simplify' it in some way, but definitely 'as is'. Of course a moulded head like on a diaoshi or Kimmi doll still looks better and more realistic, but those take up more space as a result (an important factor for me)!
The skin also seems to be not a single flat colour, but some sort of fuzzy texture that really makes it look much more like skin, very nice!
The ponytail looks cute: even if not inflated you can drape it over her shoulder making her extra-gorgeous (imho, but I have a thing for high ponytails )
The proportions are also quite accurate and anatomically fairly correct (as I designed it).
She could even pass for a real woman in a fogged-up mirror The breasts are magnificent and exactly the size I wanted! The 'valves-for-nipples' were the finishing touch (and will probably cause me to always inflate them by mouth ) When properly inflated, she can even sit up by herself on a few cushions! The arms were a bit wider open than I had designed, but less so than I thought judging from the pictures they made: she was suspended then and the tether pulled the arms open even more. Then again it's still a very 'inviting pose'. The only thing I could 'nitpick' on is maybe the fine white lines along most of the seams. Don't know why they're there, maybe it's inherent to they're production process, or maybe they are a bit too conservative while cutting the vinyl? But I find it rather minor
Material
Super soft and smooth! Satin-like. Even slightly stretchy, bordering on a latex-like feeling: fantastic! It's hard to describe, but it just begs to be caressed, grabbed and squeezed!
It's so stretchy it's even hard to tell when she's fully inflated: with regular inflatable dolls, you clearly have a moment that you know "this is it, any more and she'll blow". Even after 'fully' inflating her, I could still keep inflating little bits later on as the material seemed to 'settle' bit by bit. And no, I'm pretty sure it's not a pin-hole leak!
My DEMI doll was already a major step up from my Jeannie doll, material-wise, but this is another one entirely! Unless my DEMI doll has lost a bit of softness over the year(s)? I think not though...
Also, the SPH in the mouth has quite a big 'ring' inside at the opening, making the opening quite small, so I thought that I would have to make that bigger (like I needed to do on DEMI and Jeannie) or make a few cuts, to prevent chafing of my private parts, but no chafing whatsoever: the material is so smooth there is no 'sharp' edge at all, no need to ruin the beautiful printed mouth! There was also no real 'smell', other than the 'regular PVC-smell', but I got so used to that, it didn't really register.
How long the ink will stay on is another question, but only time (and use) will tell, I guess? That seems to be a major issue in the past with Hongyi dolls, that the print got scratched off quite easily... I already see a few marks now after having stored and inflated her twice, so they haven't got that completely fixed yet.
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
As usual from Hongyi: excellent! Sturdy! No glued seams, all 'welded'. If you see how hard they inflate them to make their 'finished production' pictures, there's no worry that she won't hold my weight (about 72kg). Speaking of weight: the total package weighed 1.45kg, so I'd estimate the doll alone just above 1kg.
Valves are the dual-action type with an 'anti-leak' first stage for inflation, and a bigger second stage for quick deflation. You can of course use the second stage for a quick 'base inflation' and then finish off with the inflation stage. There are 10 (!) air chambers in this doll: 2 arms, 2 legs, 2 breasts, torso, head, ponytail and (last but not least) one separate for the pussy (see below).
Packaging was also quite well, with an extra foamy cloth she was wrapped in to protect here and a plastic wrap around it all to keep it all tight. And all that in a tarpaulin carry bag. The box was maybe a bit on the smallish side, bulging quite a bit. But there was nothing in there that could break anyway.
SPH a.k.a. the naughty parts
There are 2 SPHs: one for the mouth and one for the pussy.
The one tor the mouth is a regular one, with a bit a smallish opening (the tunnel itself is wide enough anyway), but as already mentioned, as the material is so soft and stretchy, that's not a problem.
For the pussy, I opted for an 'independent SPH' as they call it: one with it's own mini-inflation chamber around it, so you can better regulate the pressure. And indeed, you can change how tight it feels to some extent!
And now comes the drawback of the super-soft material: it is so soft that is lessens the sensation a bit, especially when using lots of lube. Not to the extent that you lose all sensation, though: it still feels quite good and the separate air-chamber around the pussy can adjust the tightness and thus add to the sensation. Maybe an insert will do wonders there? Not tried yet, though! Sex Yay!
Well, that's what it's all about, right (at least for me: looks are a lesser requirement, prime reason for this doll is the nookie)
Nothing short of fabulous (considering it's a doll, can't hold a candle to good sex with a real woman, of course). Due to the stretchy nature of the material, the doll is quite bouncy (which is nice!).
Breasts have the perfect shape and position.
Pussy is placed more or less anatomically correct. At least, I had no 'access-problems' like on cheap run-off-the-mill spread-eagle dolls!
And the pose allows for a myriad of positions: giving head on her knees, titty fucking while she squats or while straddling her, you standing against a wall, she lying or sitting on the edge of a bed/table, missionary, (reverse) cowgirl, doggy style, straddling 1 leg, 69...
And all that without even having to deflate her a single bit! With some creative deflation, I bet you'll have even more possibilities.
Spooning and sleeping with her will be a problem fully inflated, but deflating the arms and legs slightly fixes even that: spooning and cuddling feels great!
Conclusion
I had this doll made mainly to improve a few drawbacks of my DEMI doll (and also because I simply like dolls and for the exciting having a new one made, I guess... )
DEMI's pose was close to perfect, but her breasts were a little too small, the arms behind the head didn't really have any added value, the shoes were a mistake (I know someone commented on that back in the day and I thought it wouldn't, but there you go...), that weird hair-thingy ended up bothering me more than I thought it would, the print-job was not fully what I had hoped and the 'android theme' had worn off, since.
So, I think I can honestly say 'Mission accomplished'! She's all I had hoped and wished for and more! Don't know if I'll be using my DEMI doll all that much then
This doll is in another league again! I can't hype Hongyi enough... Thank you guys!
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
- Kelvin Klein
- Active Member
- Posts: 135
- Joined: Thu Mar 30, 2023 9:37 am
- Location: Somewhere in the UK
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
My Partner in crime & naughty girlfriend is Kim1970
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
- Kelvin Klein
- Active Member
- Posts: 135
- Joined: Thu Mar 30, 2023 9:37 am
- Location: Somewhere in the UK
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
My Partner in crime & naughty girlfriend is Kim1970
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
Re: Meet Evie, my new Custom Hongyi Girl
My motto is ' Sharing Is Caring '
- infl8orama
- Senior Member
- Posts: 283
- Joined: Tue Sep 02, 2003 12:00 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
— H.L. Mencken
Re: Meet Evie, my new Custom Hongyi Girl
Awesome stuff - DLD -
Evie is amazing, here size and shape are pure inflatable fantasy brought to life
In my opinion, IMO - I find air babes in this shape to the ultimate blow up babe - yet all we get are the standing at attention or air doll designed to sit but nothing more
Air dolls in this pose make truly awesome sex dolls - with added benefit that when partially inflated they can be your snuggle luver when on the couch
Best of luck with Evie - DLD
As the old adage goes size is everything -
Stay inflated
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
Mail to Ava: hongyi8@foxmail.cominfl8orama wrote: ↑Fri Apr 28, 2023 12:12 am Absolutely delightful! Would we be able to contact them to get similar dolls off the same plans?
She was my sales rep at Hongyi Toys with a link to this topic (passed it on to her), she'll be able to help you, I'm sure!
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact:
Re: Meet Evie, my new Custom Hongyi Girl
My thoughts exactly!yorktown wrote: ↑Fri Apr 28, 2023 9:42 am In my opinion, IMO - I find air babes in this shape to the ultimate blow up babe - yet all we get are the standing at attention or air doll designed to sit but nothing more
Air dolls in this pose make truly awesome sex dolls - with added benefit that when partially inflated they can be your snuggle luver when on the couch
Re: Meet Evie, my new Custom Hongyi Girl
Re: Meet Evie, my new Custom Hongyi Girl
The inflatable looks good man! I hope you enjoy it!
Yeah, making and posing your model in Daz (or any other 3D art program really) seems to be the best way to go. Kelly (hongyi5@hongyitoy.com) is the rep I have worked with for all of my inflatables. She has been pretty good to me. There have been quite a few miscommunications over the years though. I actually had one on the last inflatable I had ordered, which really sucks.
I agree that the waiting is a bitch to get through. I don't know what it is when ordering a new inflatable that just makes the days seem to drag.
- DollLoverDude
- Active Member
- Posts: 164
- Joined: Fri Sep 02, 2016 6:15 am
- Contact: