2 teardrop holes in tpe vag plug. Can I do this to fix it?
- ondsdoll
- Doll Mentor
- Posts: 1117
- Joined: Thu Aug 17, 2023 10:41 am
- Location: The Netherlands
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
I also saw the same issue with FunWest Doll.
Dolls orifices that lead with a string tied to the skeleton is causing mold and bacteria.
This is actually a factory defect that leads to serious health risks.
- ondsdoll
- Doll Mentor
- Posts: 1117
- Joined: Thu Aug 17, 2023 10:41 am
- Location: The Netherlands
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
are u talking abou this?Booty Call Dolls wrote: ↑Mon Mar 25, 2024 6:38 pm BTW, I have used GE 2 clear silicone adhesive with great luck on TPE dolls and it dries very soft.
im ready to buy this asap....
anyone? is he talking about this? and tape 2 tooth brushes with duct tape and put in a plastic pvc pipe that's 10 inches long and 1 inch in circumference diameter and push an earlobe of a extra tpe head and seal this by holding it for 10 minutes and air drying it on its own (curing it for 2 days)
which is basically "caulk" glue that doesn't seem to crystalize like super glue into glass and fuck up ur dick when fucking the doll ??
attached pic
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
then
chop off ear lobes back of neck off an extra unwanted tpe doll (extra head)
then apply the above G2 clear glue Generously A LOT, to the extra tpe pieces
and then put THE TPE PIECES inside a 10 inch plastic pvc tube 1 inch in diameter IN HER PUSSY CAVERN
and push it up WITH THE 2 TOOTBRUSHES TAPED TOGETHER BY DUCT TAPE (THIS TAKES THE PLACE OF A 9 INCH DOWELL WHICH I DONT HAVE AT HOME) until it touches the 2 tear drop holes or touches 1 tear drop hole and then guide the tube to the other hole (1 STEP or 2 steps) depending if i can fit both in the pvc tube
and then hold for 15 minutes till it dries
and then run an electric keyboard duster in her pussy to dry
and then let it air dry (cure) dry on its own for 2 days
Is this the glue?? there's nothing out there that has G2 it's the attached pic and it's G2 some other # combo
I'm desperate to finish or attempt this asap,
anybody? know? guest or other person here.... ??
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
yea even though it's a good company, im not about to use something as caustic as acid that looks like it can burn my fingertips /fingerprints off
so if this glue GE ____ clear sealant doesn't crystalize like loctitie or other super glue, it won't form glass shards that will hurt my noodle when penetrating her.
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
https://www.amazon.com/GE-GE284-Silicon ... r=1-3&th=1
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
thanks that's nice of u, yes
i agree
i am super careful
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
Hi Alpha,alphamaledollmaster wrote: ↑Wed Mar 27, 2024 2:51 am ^ her pussy hole is 9 inches deep so i need a dowel (or 2 brand new toothbrushes, unused duct-taped together so that they're 9 inches long) and reach the top of her pussy where the 2 holes are
then
chop off ear lobes back of neck off an extra unwanted tpe doll (extra head)
then apply the above G2 clear glue Generously A LOT, to the extra tpe pieces
and then put THE TPE PIECES inside a 10 inch plastic pvc tube 1 inch in diameter IN HER PUSSY CAVERN
and push it up WITH THE 2 TOOTBRUSHES TAPED TOGETHER BY DUCT TAPE (THIS TAKES THE PLACE OF A 9 INCH DOWELL WHICH I DONT HAVE AT HOME) until it touches the 2 tear drop holes or touches 1 tear drop hole and then guide the tube to the other hole (1 STEP or 2 steps) depending if i can fit both in the pvc tube
and then hold for 15 minutes till it dries
and then run an electric keyboard duster in her pussy to dry
and then let it air dry (cure) dry on its own for 2 days
Is this the glue?? there's nothing out there that has G2 it's the attached pic and it's G2 some other # combo
I'm desperate to finish or attempt this asap,
anybody? know? guest or other person here.... ??
Sorry I have not used this G2 Silicone glue before. So I cannot speak to the effectiveness. I know Jeff at BCD has a great rep so hopefullly he will give you more guidance.
As far as TPE solvents, (3M94 Primer) yes, it does eat through TPE and dissolve it. That's why it is much much better to make a thicker TPE paste (you basically cut up a bigger tpe piece into smaller pieces, pipette some 3M 94 on to the TPE wait for it to dissolve into a smooth paste and viola you have something that when the primer evaporate, will turn back to a consistency like your TPE chunk.
The TPE paste does soften the TPE that it lands on a bit (it won't eat through it though...unless the paste is too thin and the tpe to primer ratio is higher in the primer side, so a thicker paste but thin enough to flow so you can apply it will be good enough.
I have included this instructional video by this fabulous doll hobbyist. Check it out she knows what she is talking about. Making the TPE paste after watching the video helped me a lot.
Hope this helps you.
https://www.youtube.com/watch?v=2Ta-igR ... llEmporium
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
The 3M 94 Primer is very reactive with TPE but if a paste of TPE and 3M 94 Primer is made it becomes much more manageable
Many of the gurus swear by this stuff, Arthur1960 is now a devotee of the primer, for example
viewtopic.php?p=2340434#p2340434 Nipple repair Arthur1960
or muesky6969 viewtopic.php?p=1821590#p1821590
or Wheezer, the RevJack or a whole list of highly skilled owners who've found the primer paste to be capable of solving a multitude of repairs
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
Don't use silicone on a TPE doll when the real repair using 3M 94 solvent is available and time tested.alphamaledollmaster wrote: ↑Wed Mar 27, 2024 2:42 amare u talking abou this?Booty Call Dolls wrote: ↑Mon Mar 25, 2024 6:38 pm BTW, I have used GE 2 clear silicone adhesive with great luck on TPE dolls and it dries very soft.
im ready to buy this asap....
anyone? is he talking about this? and tape 2 tooth brushes with duct tape and put in a plastic pvc pipe that's 10 inches long and 1 inch in circumference diameter and push an earlobe of a extra tpe head and seal this by holding it for 10 minutes and air drying it on its own (curing it for 2 days)
which is basically "caulk" glue that doesn't seem to crystalize like super glue into glass and fuck up ur dick when fucking the doll ??
attached pic
Don't make up solutions here in this thread, go research the topic on TDF, we have put the answers out there for everyone. If it doesn't include 3M 94 solvent, you're doing it wrong.
And there is no such thing as TPE GLUE.
It's a scam or worse yet I've seen Superglue re-labeled as TPE and Silicone glue.
ALSO TRY Reverend Jack's Anointed Snake Oil, good for cleansing stains from the body and the Soul! Step right up folks, only $5 a bottle! We got plenty to go around! Cash only please.
Aibei 158 Blue Elf, AS 157, XES 128, OR 156G, WM 160C (r), Sanhui 168 (r), WM 157B, WM 138D (Faun), Mistress 168 (r), 6YE 100 (Bubbles)
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
If youre in europe theres a guy that can fix your doll, i think he uses a speculum and a rod with heat to melt the TPE to form a good seal. Please dont use any silicon products on your TPE doll, it will ruin it further.
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
You are simply wrong. Accept it.alphamaledollmaster wrote: ↑Wed Mar 27, 2024 2:54 am that 3m primer altough from a reputable company looks like it can burn the skin off an elephant ....
yea even though it's a good company, im not about to use something as caustic as acid that looks like it can burn my fingertips /fingerprints off
so if this glue GE ____ clear sealant doesn't crystalize like loctitie or other super glue, it won't form glass shards that will hurt my noodle when penetrating her.
I'd you want to break from experience, do so, but don't try to convince anyone it's because you think you have the sliver of truth everyone else lacks. You don't.
You have been instructed, and nurtured, and coddled, and yet you keep going from thread to thread stirring up the same drama. Why?
My fear is that someone who doesn't know better will take you seriously.
You're just wrong.
Learn from those with experience, question them, talk to them, but stop disrespecting everyone who tries to help you.
Reverend Jack
ALSO TRY Reverend Jack's Anointed Snake Oil, good for cleansing stains from the body and the Soul! Step right up folks, only $5 a bottle! We got plenty to go around! Cash only please.
Aibei 158 Blue Elf, AS 157, XES 128, OR 156G, WM 160C (r), Sanhui 168 (r), WM 157B, WM 138D (Faun), Mistress 168 (r), 6YE 100 (Bubbles)
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
I tried to take the manufacturors to task on this. Contacted them directly both privately and publicly.
Results?
1) All the manufacturors lied and said they fixed the issue. Both privately and publicly.
2) I almost got banned from TDF.
Silicone dolls don't have this issue, they are made differently. So they knot few hours to do it, they just won't.
Reverend Jack
ALSO TRY Reverend Jack's Anointed Snake Oil, good for cleansing stains from the body and the Soul! Step right up folks, only $5 a bottle! We got plenty to go around! Cash only please.
Aibei 158 Blue Elf, AS 157, XES 128, OR 156G, WM 160C (r), Sanhui 168 (r), WM 157B, WM 138D (Faun), Mistress 168 (r), 6YE 100 (Bubbles)
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
Post by Booty Call Dolls » Mon Mar 25, 2024 3:38 pm
BTW, I have used GE 2 clear silicone adhesive with great luck on TPE dolls and it dries very soft.
- alphamaledollmaster
- Senior Member
- Posts: 286
- Joined: Sun Jul 26, 2020 4:03 pm
- Contact:
Re: 2 teardrop holes in tpe vag plug. Can I do this to fix it?
i tried it with mineral oil, still required a lot of effort
on Amazon, there seems to be a 24 mm glass rod, that's like 0.94 almost 1 inch in diameter
is that enough to put the endoscope inside and work the 3m primer?