THE WM FILES n°50: New “Bimbo Doll“ in the making!
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
- WM Dolls News
- Manufacturer Affiliated
- Posts: 472
- Joined: Thu Mar 24, 2016 5:08 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Sadly TPE is poured inside the moulds with very high temperatures so anything that melts can't be used. This is why we tried metal first.
Haha! We already have many of them. And they do this even for free!
Sadly we had all our WM YouTube and Vimeo accounts deleted. Even the ones we paid for and that we made only available for adults (+18).Mamilla wrote: ↑Tue Nov 21, 2023 5:09 amAsk and you shall receive.ParadiseCity wrote: ↑Mon Nov 20, 2023 4:18 pm Any chance of those videos being uploaded here for those of us without "X"?
I really, really need to see this!
wm20_hollow.mp4
As soon as you start to move the dolls and they begin to wiggle to much it's considered porn!
The Bimbo doll video in this thread would have been considered hard core!
Thank you Mamilla for the download link. If you guys know a way to embed the video in this thread feel free to do so.
However, in the event of an explosion, WM declines all responsibility.
No, not yet. It's a totally different project also. I mean not just a scaled down version of this Bimbo doll.
We too! We are working on that.
Below is a non-exhaustive list of big lips heads available from WM that may fit the Bimbo doll body:
Ted
- WM Dolls News
- Manufacturer Affiliated
- Posts: 472
- Joined: Thu Mar 24, 2016 5:08 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Yes of course. Here are the official nomenclature numbers of the two Bimbo heads:mathieu242 wrote: ↑Fri Nov 17, 2023 3:45 amWill the "bimbo" heads be available to purchase separately like the rest of your doll heads?
Ted
- WM Dolls News
- Manufacturer Affiliated
- Posts: 472
- Joined: Thu Mar 24, 2016 5:08 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
A small step maybe but a giant leap for the WM Bimbo doll lovers: the four prototypes have been made!
I don't know for sure yet which one has solid, gel filled, hollow or metal balls breasts? I have my idea but I don't want to write nonsense.
So meanwhile the only thing we can do is guess but there are some evident hints.
Below are photos with the movement range of the Metal balls breasts:
Hopefully we will receive some more pictures soon as well as... videos!
Ted
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
are these available to purchase?WM Dolls News wrote: ↑Sat Nov 25, 2023 6:42 am Hello,
A small step maybe but a giant leap for the WM Bimbo doll lovers: the four prototypes have been made!
I don't know for sure yet which one has solid, gel filled, hollow or metal balls breasts? I have my idea but I don't want to write nonsense.
So meanwhile the only thing we can do is guess but there are some evident hints.
Below are photos with the movement range of the Metal balls breasts:
Hopefully we will receive some more pictures soon as well as... videos!
Ted
- cycleingking
- Doll Mentor
- Posts: 1025
- Joined: Mon Mar 21, 2022 12:57 am
- Location: Middle of America engulfed by mistresses
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
I do know one thing, I would buy this doll today if it had gel boobs and presented like this! Absolutely my preference!!
Passionate about ROS, LHP and Silicone
Mistresses
-
- Active Poster
- Posts: 66
- Joined: Tue May 23, 2023 9:24 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Firstly I've got to say, what a lovely way to start the day! Fresh coffee and fresh bimbos. Doesn't get much better.cycleingking wrote: ↑Sat Nov 25, 2023 9:13 am This is really really impressive. I am not sure if I am sold on it just yet, but I absolutely want to give a BIG Applause for the forward thinking you are driving Ted!!
I do know one thing, I would buy this doll today if it had gel boobs and presented like this! Absolutely my preference!!
My_preference.jpg
Secondly, I second all of what Cycleingking said. Excellent work to all involved and keep up the experimentation. Even if they don't work out as intended, you'll still learn something from the experience.
On that note, could a small spring between the steel balls and their hinges work in allowing for the adjustment like shown in the photos, but also allowing for a little bounce? Bit like a speed ball boxers use for training. Just a thought. Keep up the good work and the regular updates.
- WM Dolls News
- Manufacturer Affiliated
- Posts: 472
- Joined: Thu Mar 24, 2016 5:08 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
I'm afraid it will still take a little while until the Bimbo doll is available for purchase. Usually the next step, now that the prototypes are made, is to make a couple more and send them to photographers to do promo shootings. Then, once we get the photos we can send them to vendors and make an official availability announcement.
But we will probably offer a limited amount of Bimbo dolls for pre-order for TDF members.
I can't tell you for sure because I didn't got confirmation yet but the chances are very high that the third one from the left (the one you squared in re) is indeed the one with gel boobs. What makes me believe that? Bigger breast volume and more sagging.cycleingking wrote: ↑Sat Nov 25, 2023 9:13 amI do know one thing, I would buy this doll today if it had gel boobs and presented like this! Absolutely my preference!!
ParadiseCity wrote: ↑Sat Nov 25, 2023 4:57 pmExcellent work to all involved and keep up the experimentation. Even if they don't work out as intended, you'll still learn something from the experience.
I think this would be too difficult to do. If the spring is too weak, to allow for bouncing, then the joint it is attached too will be very difficult to move. The spring will reduce the leverage effect too much, almost eliminating it, thus making it impossible to move the hinges. If the spring is to strong it would be possible to move the joints but the bouncing effect would be gone. Besides, the springs would be embedded into the TPE material and most of its bouncing properties lost anyway.ParadiseCity wrote: ↑Sat Nov 25, 2023 4:57 pmOn that note, could a small spring between the steel balls and their hinges work in allowing for the adjustment like shown in the photos, but also allowing for a little bounce? Bit like a speed ball boxers use for training. Just a thought.
It seems you guys don't want to play? Nobody has tried to guess which doll is which yet?
Maybe there is a reward for the one who gives the right answer?
Ted
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
AwesomeWM Dolls News wrote: ↑Sun Nov 26, 2023 4:37 am
But we will probably offer a limited amount of Bimbo dolls for pre-order for TDF members.
I'm gonna go with thisWM Dolls News wrote: ↑Sun Nov 26, 2023 4:37 am It seems you guys don't want to play? Nobody has tried to guess which doll is which yet?
Maybe there is a reward for the one who gives the right answer?
Ted
Dolls Castle 150K
ZX160J,
FJ 145,
WM164J, WM150M
HR164,
JY159,
LushDoll 153E
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
My guess would be
Anti-Gravity Skeleton, Air-Filled, Gel-Filled and Solid.
No risk, no fun.
- Birdcaller
- Contributing Poster
- Posts: 34
- Joined: Wed Nov 22, 2023 5:41 pm
- Location: United States
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
My first: ZELEX SLE ZXE217-1/ ZX160J
- Luxferratur
- Newbie
- Posts: 1
- Joined: Fri Nov 03, 2023 3:36 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
Luxferratur wrote: ↑Sun Nov 26, 2023 10:12 am Are there any options in consideration to increase the volume of the chest?
Yes. Using a very small needle and air pump
Or, using a needle to inject a gel like aloe vera until you're happy.
That's all on the customer to do what they want. No manufacturer will do this for you because things can happen in the shipping process that might damage or explode the breasts.
viewtopic.php?p=2425213#p2425213
HAPPILY MARRIED TO
IVY- WM 173H & VICTORIA - SM 150L
My Favorites
WM 173H - SM 150L - JY-150 - JK 150J - HR 162L - HR 158 - SE 161F - JY 159BB - SM 175L - YL 153
-
- Contributing Poster
- Posts: 40
- Joined: Tue Nov 02, 2021 1:59 pm
- Contact:
Re: THE WM FILES n°50: New “Bimbo Doll“ in the making!
For the "pressed" picture, does this equal squeezed together? Can these be squeezed together a bit more together or is this all?WM Dolls News wrote: ↑Sat Nov 25, 2023 6:42 am Hello,
A small step maybe but a giant leap for the WM Bimbo doll lovers: the four prototypes have been made!
I don't know for sure yet which one has solid, gel filled, hollow or metal balls breasts? I have my idea but I don't want to write nonsense.
So meanwhile the only thing we can do is guess but there are some evident hints.
Below are photos with the movement range of the Metal balls breasts:
Hopefully we will receive some more pictures soon as well as... videos!
Ted