So is NO inventor/Company working on a SELF cleaning doll?
-
- Active Poster
- Posts: 81
- Joined: Tue Sep 04, 2018 6:25 pm
- Contact:
So is NO inventor/Company working on a SELF cleaning doll?
- Maviarab
- Doll Patriarch
- Posts: 4502
- Joined: Fri Jan 25, 2008 12:00 am
- Location: At one with the Schwartz
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
Ok. My first question would be....how would 'you' do it? I personally can't think of any ideas or implementations that would work...it really is 'not' that simple when you think about it is it?professorjpj wrote:ALso why is it seem to difficult to come up with this?
But if you're the first...I'm sure the good folks of TDF would love you...play around with some ideas.
Re: So is NO inventor/Company working on a SELF cleaning dol
Re: So is NO inventor/Company working on a SELF cleaning dol
Re: So is NO inventor/Company working on a SELF cleaning dol
I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.
I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
You don't have to take a doll to the tub to clean after banging.
You can do it right in your own bedroom or doll room.
You just need to get 5 items that are not expensive.
1. 5 gallon bucket can be gotten at Walmart for about 4 dollars.
2. Luggable loo toilet seat for bucket. 15 bucks at Dicks sporting goods. 3. Flavor injector- 5 bucks or so at Walmart.
4. Antibacterial hand soap. 5. Electric Air bed mattress pump- 10 to 15 dollars Kmart. Probably a lot cheaper than what a self cleaning option would cost if any company ever came up with one.
It only takes me about 30 minutes to clean and completely dry. And this method has my dolls seal of approval. For more details see my cleaning and drying threads in my signature.
Clean up is only a big deal if you make it one......
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
Re: So is NO inventor/Company working on a SELF cleaning dol
Cleaning clothes 1$ store + soap.. Finger(free). Paper towels 1$. 2$ total. clean dry under 5 mins in bed without moving her much.
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
I have had no problem cleaning my silicone lady in the 3 years I have had her.smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.
I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
Re: So is NO inventor/Company working on a SELF cleaning dol
gonestill77 wrote:I have had no problem cleaning my silicone lady in the 3 years I have had her.smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.
I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.
I don't know, my newer sanhui feels about the same as my zone..Just as my jm one. When compared to my tpe dolls. jm/san has about the same type of feel. My zone may be a bit more firmer.
I mean I can't even reach the end cap of my silicone doll with my finger, its too hard vs my tpe which is easy.
Silicone is really easy to clean with flushing. While TPE eh I don't trust without my boroscope if there are any damages in her fix design.
Re: So is NO inventor/Company working on a SELF cleaning dol
On the subject of this topic, a self cleaning system just does not seem feasible. Anything complicated would be too difficult to implement and create a major point of failure in the doll. The only remote idea I can come up with here is to have a small tube that extends out from the back of a dolls anal/vaginal cavity, through it's body, and up somewhere accessible. You could then remove a 'plug' to reveal an orifice to pour a cleaning solution down. Gravity would do all the work and flush out the ick. At this point you just gotta dry.
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
Silicone dolls don't have a cap or plug like TPE dolls do because they are molded differently.smallcat wrote:gonestill77 wrote:I have had no problem cleaning my silicone lady in the 3 years I have had her.smallcat wrote:I havent really had issues with cleaning. Mainly silicone would be harder since all these brands are very firm and harder to stretch via finger method. I use a simple 5/16 wood dowel wrapped with cleaning cloth soap, and easy clean and insert paper towel. I do the same with my tpe dolls with inserting paper towel rolled up with finger/dowel.
I'm planning on ordering another tpe with shorter fixed length vag, still debating on length tho..4"-6", Can't wait. Didnt know they did that.
Not hard to clean at all.
The silicone is not firm in her vag area at all. The flavor injector goes in with ease.
And the air pump nozzle has no problem getting in there either to dry her.
Actually, she is almost as soft as TPE all over her body.
Not a big difference.
And, newer silicone isn't that firm at all. It's actually quite soft and fleshlike.
I don't know, my newer sanhui feels about the same as my zone..Just as my jm one. When compared to my tpe dolls. jm/san has about the same type of feel. My zone may be a bit more firmer.
I mean I can't even reach the end cap of my silicone doll with my finger, its too hard vs my tpe which is easy.
Silicone is really easy to clean with flushing. While TPE eh I don't trust without my boroscope if there are any damages in her fix design.
I can force my middle finger up there and reach the end of her vaginal tunnel.
Forgot to mention I use a soft leather auto chamois to get excess water before I use the air bed pump.
I wrap it around my middle finger to get all excess water out of her va jay jay before I put the pump in to dry any and all dampness.
I have never had a mold issue in 3 years using this method.
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
Re: So is NO inventor/Company working on a SELF cleaning dol
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
Thank you!kklouzal wrote:gonestill77, after seeing your setup I have a completely new outlook on this entire subject. You sir need to write a brochure and get it put in every new dolls shipping container.
On the subject of this topic, a self cleaning system just does not seem feasible. Anything complicated would be too difficult to implement and create a major point of failure in the doll. The only remote idea I can come up with here is to have a small tube that extends out from the back of a dolls anal/vaginal cavity, through it's body, and up somewhere accessible. You could then remove a 'plug' to reveal an orifice to pour a cleaning solution down. Gravity would do all the work and flush out the ick. At this point you just gotta dry.
Glad to be of help.
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
-
- Active Poster
- Posts: 81
- Joined: Tue Sep 04, 2018 6:25 pm
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
So maybe in 100 years self cleaning dolls will be a reality? Personally I think there would be a LOT more guys with dolls if there wasnt a "cleanup" involved... This should be the number one priority for doll companies to invent..
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: So is NO inventor/Company working on a SELF cleaning dol
If you hate cleaning that much, maybe a doll isn't for you.professorjpj wrote:yeah, seriously, the cleanup is the biggest reason I am hesitating... At least with porn all you do is have a kleenex or paper towel handy... easy-peasy.. The cleanup AND the price of course.. both factors.. By the way, personally I despise cleaning... Even in my kitchen I mainly use paper plates, I only Clean when I HAVE to!
So maybe in 100 years self cleaning dolls will be a reality? Personally I think there would be a LOT more guys with dolls if there wasnt a "cleanup" involved... This should be the number one priority for doll companies to invent..
Dolls need to be cleaned and maintained and powdered and eventually repaired. You have to take care of them, otherwise, it would be a big waste of money.
The chances of a self cleaning doll becoming available are pretty nil.
Even if you use a female condom, you have to put it in and take it out and clean it I guess.
I would never use one as it looks like shit hanging out of her and rubbers greatly reduce sensation whether for a male or female.
That is why I would never use them. I'd rather fully enjoy myself and just clean up my mess when I am done playing.
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968