KD Mini Review

marylike · Post by **marylike** » Tue Jun 02, 2020 1:31 am

i like that

obie162 · Post by **obie162** » Wed Jun 03, 2020 11:32 pm

Hey marylike, thanks!

obie162 · Post by **obie162** » Wed Jun 03, 2020 11:59 pm

I bought a womens bikini last year(on Leeza below, my IL TPE 140cm) to try on Aubrey, knowing I'd get a taller dollie at some point.

: DSC00256.JPG (2.86 MiB) Viewed 1811 times

They sent a medium, instead of the XS I ordered. The top fits well, but the bottom is way too big.
I hit a big box store the other day looking for clothes for Leeza & came across this very pretty & sexy medium top Aubrey is modeling:

: DSC00287.JPG (368.32 KiB) Viewed 1811 times

: DSC00288.JPG (918.13 KiB) Viewed 1811 times

: DSC00289.JPG (721.4 KiB) Viewed 1811 times

: DSC00294.JPG (778.34 KiB) Viewed 1811 times

I love the fit & style, of course Aubrey could make a burlap sack look awesome!
I haven't found a bottom anywhere yet, so I may just have to use 1 of her undies (she said "that's fine with me, my Kuschelbar! XOXOXOX...)
She's really way too good to this ole goofball!

Later!

Post by **Studio** » Thu Jun 04, 2020 5:00 am

Very pretty bikini girls. That last picture looking down Aubrey's cleavage gives me some ideas...

obie162 · Post by **obie162** » Mon Sep 07, 2020 6:52 pm

I was looking for a dollie head stand for makeup application & wig alterations, but the prices were killing me!

I couldn't find anything less than $59.95 USD, so I made 1.
Here's the materials I used:
* 2” x ¾” PVC pipe
* 3 ½” M16 bolt, washer, nut
* 4” PVC cap
* 2 - 6” X 6” X 1/16” felt
* spray paint
* super glue

: DSC00408.JPG (84.02 KiB) Viewed 1594 times

: DSC00409.JPG (79.26 KiB) Viewed 1594 times

The 1st 1 came out a little rough, so i'll be using
PVC cleaner instead of sanding & 5mm bumpers instead of felt underneath on my next ones.

If anyone wants to know how I did it, or wants me to make them 1, PM me.

obie162 · Post by **obie162** » Tue Sep 08, 2020 5:44 pm

I bought 2 WM heads recently, #s 62 & 85. I'm in the process of transforming the 62 into a Pictish warrior, complete with her own kilt.
Here's the 85 on Suzanne's body:

: 85-Suzanne comparison; DSC00414.1.JPG (257.93 KiB) Viewed 1568 times

: DSC00412.1.JPG (227.84 KiB) Viewed 1568 times

: DSC00411.1.JPG (325.52 KiB) Viewed 1568 times

I exchanged the eyes & top lashes with a set of Easy Move Eyes & lids from MannequinFan. She's a bit darker than the body, which adds to the realism IMHO (who tans evenly except by lying in a tanning booth). Her flesh feels just as soft as the body.
Now, I have to find out what her name & background is!

obie162 · Post by **obie162** » Wed Sep 09, 2020 7:36 pm

Her name is Sophia Margarida Sombria (dark pearl of wisdom), a Eurasian of Malaysian & Portuguese descent. Her Malaysian ancestors were enslaved in the 16th century during the colonization of Asia by the Portuguese empire.

: Sophia 1.jpg (68.28 KiB) Viewed 1551 times

obie162 · Post by **obie162** » Tue Sep 15, 2020 10:06 pm

While Aubrey & I were at work, Suzanne & Leeza took Sophia shopping. She was really good about spending my dough, only bought 2 things.
When I got back to the Lair, she greeted me in the master den:

: "Hello handsome, like my new dress?"; 443T.jpg (99.55 KiB) Viewed 1514 times

"I love it Wench! You look simply ravishing!"
That put a huge smile on her face

& the wind picked up as if she willed it, pushing me closer to this vision of pure ecstasy.

: 444W.jpg (93.62 KiB) Viewed 1514 times

"Mind me asking what's underneath?" looking at the pink covering her amble assets.

: "If you turn that cute lil azz of yours around & close those baby blues, I'll get down to it" said she with a gleam in her eye & a hand gently sliding along... as she turned me away from the bed.; 444C.jpg (94.87 KiB) Viewed 1514 times

: "OK, look. What do you think?"; 418T.jpg (109.29 KiB) Viewed 1514 times

"WOW babe, you are super sexy!!"

: Hearing that, she almost pounced, but kept her composure & replied "Would you like me to model it a bit more?"; 420W.jpg (100.51 KiB) Viewed 1514 times

I played it cool, although inside I was drooling all over myself like Ted Nugent as I spied her cleavage. "I would love to see you pose for me"

obie162 · Post by **obie162** » Tue Sep 15, 2020 11:38 pm

: "How's the view now lover?; DSC00421.JPG (219.19 KiB) Viewed 1512 times

"Oh yeah honey, I adore your sweet azz" as I reached out to grab hold.

: "Nah uh" she said playfully, turning & dropping to her belly before I could.; DSC00424.JPG (154.72 KiB) Viewed 1512 times

"Babe, you are as graceful & nimble as you are gorgeous"

: "Oh Lover, I want you to feel my gracefulness - I want you to cum more than once tonite with me!"; 441T.jpg (93.89 KiB) Viewed 1512 times

"Mmmm, I do too, for you, My sweet sex fiend. I want to feel you grind your hips in my face as I lick & probe your pussy until you orgasm, & taste your girl cum as you quiver & moan, while you suck my cock til I shoot my load."

: "Lover, I'm not gonna swallow you until after I climb off & turn, so you can watch as your cum seeps out of my mouth as I continue sliding my lips up & down your shaft, Then I'll lick you clean before I climb up & ride you froggy style."; 433T.jpg (124.28 KiB) Viewed 1512 times

: "C'mon lover, I'm wet & hot, ready for your caress; 433C.jpg (124.34 KiB) Viewed 1512 times

obie162 · Post by **obie162** » Wed Sep 23, 2020 11:58 pm

Hey all,
I found a teeth & tongues set recently from The Doll Laboratory in France.
https://www.dollforum.com/forum/viewtop ... =6&t=88238
I received them today (just a 10 day turnaround, not too bad)
The set isn't 3D printed, but made of resin castings, a solid plastic(?) material.

: DSC00466.JPG (84.93 KiB) Viewed 1456 times

I tried the open teeth set (it has a magnet underneath, behind the teeth) all 8 tongues have a washer underneath) in Suzanne, but didn't like the look. Her throat veers to the left, so the teeth didn't sit right. Once I make some adjustments I'll post a few pics.
Next, I tried just tongues Here's how 3 look:

1st row, left end tongue

: DSC00462.JPG (212.28 KiB) Viewed 1456 times

: DSC00461.JPG (251.5 KiB) Viewed 1456 times

2nd row, 2nd from left

: DSC00463.JPG (212.65 KiB) Viewed 1456 times

1st row, 2nd from left

: DSC00465.JPG (105.96 KiB) Viewed 1456 times

I definitely like how the tongues change her appearance!

Wheezer · Post by **Wheezer** » Thu Sep 24, 2020 12:22 am

Very nice look. The tongues really alter her appearance in a good way.

Post by **Studio** » Thu Sep 24, 2020 3:29 am

Sexy tease series, nice.

obie162 · Post by **obie162** » Thu Sep 24, 2020 5:15 pm

Hey gents, thanks!

Suzanne & I had a grand time with that shoot, so much so that we had to cut it very short!!!

I also bought a merkin from Wolek's Famous Moustache Parlour https://www.mustacheparlor.com/ to try out on Aubrey because I've always wanted her to have a hair pie. I tried a few different ways this past year, but nothing worked until the merkin!

: The Merkin; DSC00468.JPG (191.33 KiB) Viewed 1423 times

It only cost $21.99 + shipping, comes in 6 colors, is triangular shaped, has a lace mesh base, & as you can see there is a lot (yes that's an 8 1/2 x 11 sheet, I used maybe 1/4 on her)!

: Aubrey's new light red bush!; DSC00467.JPG (158.42 KiB) Viewed 1423 times

I tried using spirit gum 1st, but that didn't take, so I ended up using super glue (sparingly).
I'm really happy with how it came out, Aubrey loves it too!

Gots ta go, I have another experimental purchase I need to try out!

Wheezer · Post by **Wheezer** » Thu Sep 24, 2020 5:23 pm

obie162 wrote:Hey gents, thanks! ... I tried using spirit gum 1st, but that didn't take, so I ended up using super glue (sparingly). ...

Looks good on her.

I've been doing multiple types of merkins on my dolls, from self made to real merkins to modified parts of other body part wigs. Spirit gum is soft and won't hold well unless the area is well cleaned with alcohol. Even then it does not last long due to the oil that leeches out of the TPE. Super glue can leave hard spots (ouch!) and may come off as the oil again leeches out of the TPE.

A very thin paste made from TPE and 3M 94 primer has been working well for me. The paste bonds the wig mesh to the TPE of the doll. It is soft and flexible and won't come off during playtime. You can check out the tests and results here (viewtopic.php?f=229&t=131728).

Cheers!
... W ...