Racquel Returns! [WM 164J]

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Tue Sep 12, 2023 11:40 am

Factory photos are starting to come in and I am getting pumped. Racquel is being reborn as a WM 164-J gel-breasted bombshell of a woman. I can't wait for her to arrive and to share her with all of you. More to come...

: 186170 (4).JPG (1.64 MiB) Viewed 1604 times

tuffluv88 · Post by **tuffluv88** » Tue Sep 12, 2023 4:38 pm

164J's are amazing

Babel99 · Post by **Babel99** » Tue Sep 12, 2023 7:41 pm

mmm yummie. I see that they painted her (veins on her breast). I did not know they were doing this for TPE since it will fade away quickly. It's nice though since it will give s super good impression when you will unbox her.

That freaking 164J from WM is driving me nutz. To this day I still cannot believe that I resisted ordering her.

Uncletravelingmatt · Post by **Uncletravelingmatt** » Tue Sep 12, 2023 7:43 pm

She must have back problems being that top-heavy.

Post by **Studio** » Tue Sep 12, 2023 7:44 pm

Sp0ngeWorthy wrote: ↑Tue Sep 12, 2023 11:40 am I can't wait for her to arrive and to share her with all of you.

After a pic like this we might be almost as excited as you are!

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Sun Sep 17, 2023 9:56 pm

tuffluv88 wrote: ↑Tue Sep 12, 2023 4:38 pm 164J's are amazing

I am beyond excited to find out just how true that is! Any advice on taking care of the larger breasted girls? I am assuming she should be stored in a way that supports her breasts but doesn't put sustained pressure in any one place... so as not to create imprints, etc? My 162E was stored in a flight case on 3" memory foam. Should this one be stored standing with a hanging hook? On her back? hmmm

Babel99 wrote: ↑Tue Sep 12, 2023 7:41 pm mmm yummie. I see that they painted her (veins on her breast). I did not know they were doing this for TPE since it will fade away quickly. It's nice though since it will give s super good impression when you will unbox her.

That freaking 164J from WM is driving me nutz. To this day I still cannot believe that I resisted ordering her.

Same here. I unchecked the box for hyperrealism but they painted her anyway. I didn't love the pattern on her breasts so I actually had them remove it. Would have washed off during her first bath. lol

I did NOT resist ordering it. You can live vicariously though me. I'm here to help.

Uncletravelingmatt wrote: ↑Tue Sep 12, 2023 7:43 pm She must have back problems being that top-heavy.

I have a plan to help out with that... basically I'm going to hold her breasts all the time.

Studio wrote: ↑Tue Sep 12, 2023 7:44 pm After a pic like this we might be almost as excited as you are!

It's getting REALLY close. Next two weeks at the most. Guess I'll just be unable to breath until then....

Babel99 · Post by **Babel99** » Sun Sep 17, 2023 11:00 pm

Sp0ngeWorthy wrote: ↑Sun Sep 17, 2023 9:56 pm

I am beyond excited to find out just how true that is! Any advice on taking care of the larger breasted girls? I am assuming she should be stored in a way that supports her breasts but doesn't put sustained pressure in any one place... so as not to create imprints, etc? My 162E was stored in a flight case on 3" memory foam. Should this one be stored standing with a hanging hook? On her back? hmmm

For the heavy chess gal, buy a good sport bra and make her wear it when in her box. If not, the TPE will tear between the breast after a while. But with a bra it should be good.

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Sun Sep 17, 2023 11:15 pm

Babel99 wrote: ↑Sun Sep 17, 2023 11:00 pm For the heavy chess gal, buy a good sport bra and make her wear it when in her box. If not, the TPE will tear between the breast after a while. But with a bra it should be good.

Great to know! I've already got several ready to go so they will be protected.

Also, just got the update that she's in the air.

Dick Vicious · Post by **Dick Vicious** » Mon Sep 18, 2023 12:32 am

I have this babe. no issues with chest being unsupported. But it wouldnt hurt to have them supported when she is stored. You'll be surprised how much lighter she is in comparison to other babes. Congrats! You are really going to enjoy her!

Big_Easy · Post by **Big_Easy** » Mon Sep 18, 2023 6:08 am

Great choice! And she’s very beautiful in the factory photos. Safe travels!
Cheers

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Mon Sep 18, 2023 9:54 am

Dick Vicious wrote: ↑Mon Sep 18, 2023 12:32 amI have this babe. no issues with chest being unsupported. But it wouldnt hurt to have them supported when she is stored. You'll be surprised how much lighter she is in comparison to other babes. Congrats! You are really going to enjoy her!

How did I miss Cynthia??? I was searching DF for 164J looking for owner's photos and didn't see it. Either way, HOLY SHIT. Now I am even more pumped for Racquel to arrive. Cynthia is a SMOKE SHOW. I am going to try and avoid having to store her in the flight case. Her home when she's not out with me will be a secured closet with lots of room to have her set up on a piece of furniture or something else supportive. I'll roll with a snug but fairly loose fitting sports bra of some kind just to be sure.

Big_Easy wrote: ↑Mon Sep 18, 2023 6:08 amGreat choice! And she’s very beautiful in the factory photos. Safe travels!
Cheers

It was a long and difficult decision but I think it was the right one for me. Hopefully this isn't too much titty to "handle"

Babel99 · Post by **Babel99** » Mon Sep 18, 2023 10:16 am

Dick Vicious wrote: ↑Mon Sep 18, 2023 12:32 am I have this babe. no issues with chest being unsupported. But it wouldnt hurt to have them supported when she is stored. You'll be surprised how much lighter she is in comparison to other babes. Congrats! You are really going to enjoy her!

It happened after few years for my SM 136 and Piper 150 Jessica. So if your doll is not that old, I am hinting you ... the time create that tear. If you want to keep her mint, I really recommend you do it. I now use the cheap fruit of the loom one that you can buy on amazon (like 3 for 15$). They fit nicely and hold the breast tight.

soonpk · Post by **soonpk** » Fri Sep 22, 2023 10:46 pm

Gorgeous lady!

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Wed Sep 27, 2023 1:22 pm

Ahhh. The BRUTAL wait is finally over. Racquel has officially been reborn as a WM164J and has arrived at her new home with me. My initial assessment is that she is around the same weight as the 162E... at least close enough that it's not really possible to tell the difference. Granted, the last time I lifted the 162E version of Racquel was back in June of 2022 so take that for what it's worth.

A HUGE difference I have noticed already is LHP. The 164J, as mandos mentioned back in the original launch thread, performs WONDERFULLY in doggie. I even banged her standing-doggie last night and it was glorious. The 162E version was much more difficult to use in doggie, though, I will say that the 164J is a bit more difficult to use in missionary so I guess that's the trade off. The way the vagina is built on the 164J is far superior to the 162E mold, however. The labia protect the opening and it appears to be much more tear resistant because of this.

Thank you to everyone that recommended the gel breasts. Holy sheeeeeeeeut. Hollow were great but gel??? OMG they are so incredibly lifelike. The the "J" cup are not nearly as overwhelming as I thought they might be. The vendor photos don't always give a great sense of scale and at one point I was a bit worried that they might be too much titty. They are not. They are perfect.

So far, I'm very happy with the purchase. The only real bump in the road was final mile delivery via UPS. They were refusing to deliver it because of "multiple errors on the label". Communication with my vendor of choice was limited because they are based out of Hong Kong and the number listed for their US based warehouse led to a full voicemail box. I could only get single responses and never an actual conversation because they would only reply to me during times I was asleep because of the time diff. Not ideal when a problem arises.

That said, the doll arrived without any visual defects. However, it seems like the skeleton frame was not properly centered in the mold when this one was poured. There are places in the arms (and others) where you can tell the skeleton is much closer to one side than the other... definitely not centered. This causes some "bunching" around the elbows and knees that shouldn't be as noticeable as it is. However, this applies mostly to posing and photography and has not hampered my ability to bang her brains out. lol

UNBOXING:

: 001.jpg (1.99 MiB) Viewed 1046 times

Sp0ngeWorthy · Post by **Sp0ngeWorthy** » Wed Sep 27, 2023 1:29 pm

First-look photo of Racquel from last night. Naturally, she insisted on showing off after her shower. Instead of wanting to rest after her journey by getting into some PJs and climbing into bed, she grabbed a sexy white negligee, some stockings, and got to posing for me.