158C+ Ivy Preview Follow-up w/Pics
-
- Apprentice
- Posts: 14
- Joined: Wed Jan 03, 2024 3:57 pm
- Contact:
158C+ Ivy Preview Follow-up w/Pics
What follows is not so much a review, but simply sharing my experience. I'm relatively new to full-size dolls - only owned one before this Tayu 158C+ - a ready-to-ship $1250 "two looks" 158cm, 70.5#, TPE doll, that I've had for less than a year. And before that, a couple of tantalizing torso dolls, one of which I'll call Borealis 2.0, which weighs 54#. While I really enjoyed the TPE doll, 70+ pounds just wasn't working, and, of course, the quality was only adequate. But, it was a great learning experience that led me to Ivy. I wanted all the features of the TPE doll, but at the highest quality, and at or less than the weight of the torso doll. So, is the Tayu 158C+ Ivy worth 4x what I paid for the TPE doll? An unqualified YES - she's the "priceless" part of the MasterCard commercial.
My Robot Doll and Alice were amazing through the entire process. Quick replies to emails; always knew where things were in the process. 33.5 days from order to fun time!
Doll specs/options: Tayu 158C+ w/#7-1 new Ivy, Soft, Oral; Light Pink skin w/Light Tan Areola and Labia; Default makeup; Implanted eyebrows; Dark Blue eyes; M16 head connector; Standard Joints; Hard Hands and Feet/No Studs; #1 Natural fingernails and Default toenails; #3 small wedge pubic hair; Fixed LH 13cm; Ultra soft everything; Back Hole.
Packaging
The box was in great condition. No major dents or openings. Everything taped up. The internal padding is blown-in so it fits perfectly. The wrapping material was in good shape, so easy to cut up for disposal. Doll came with the obligatory accessories. Doll Packaging
The doll was wrapped in a nice blanket and it was super easy to take her out of the box. The difference in weight between Ivy and the TPE doll is about a bowling ball's worth, which is major, at least for me. Hands and feet all nicely padded. There were no visible dents, dings, or other imperfections. What struck me immediately was the quality, precision, and detail of the hands and feet. The TPE doll's wire hand skeleton provides an approximation of how a hand works this Tayu hand is something else - right down to the third knuckles. Body
I was initially interested in the Tayu 148D+ (and still am, for that matter), but there was just "something" about the 158C+ that tipped the scales. The proportions on this doll are just about perfect. Head & Face
Choosing the head was a bit of a struggle - Riley, Ivy, or Katniss? Ultimately, I decided Katniss might be better on the 148D+, and while Riley is really nice, there was that "something" again about Ivy. But when I saw the factory photos, I almost panicked. They couldn't find more unflattering lighting if they tried, and is *that* the same Ivy in the promotional picturess??!! Didn't want to hold things up, especially with Chinese New Year looming, so said "ship it". Now that I have the doll, I'm amazed at how different she can look depending on lighting, pose, wig, etc. In these pics, the red wig is a cheapo that came with the TPE doll; the two pics with the bra, she's wearing a decent synthetic wig, which is so much better. I'm heading out later today (pardon the pun) to look for real human hair wigs. TPE or Tayu, wigs are my least favorite part of the deal. Stand
About a week after ordering Ivy, I ordered a Coeros Electric Display and Storage Stand with M16, Separate M16, and Sino/EXDoll M8 connectors. I will review this separately in the Coeros forum. For the Tayu 158C+ the stand works perfectly. However, at first, I thought there was an issue with the M8 connector as it just pushed in rather than threading in. A few quick emails confirmed the correct operation. It's super easy to get the doll on/off the stand. Bottom Line
The Tayu 158C+ with Ivy head exceeds all expectations. The doll is a work of art. And so much fun. Thank you for attending my Tayu talk.
- ricardoqdq
- Senior Member
- Posts: 471
- Joined: Tue Jan 17, 2023 5:37 am
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
I agree with you, that Ivy face looks totally different than I would've expected from the promo and vendor photos. She is extremely beautiful, but not really resembling the Ivy I might've imagined.
Congrats! Looks like you're having a good time
-
- Active Poster
- Posts: 94
- Joined: Thu Sep 01, 2022 8:33 pm
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
Re: 158C+ Ivy Preview Follow-up w/Pics
This doll is supposed to have non-gaping vagina and anus. What are your thoughts about this feature?
-
- Apprentice
- Posts: 14
- Joined: Wed Jan 03, 2024 3:57 pm
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
The vagina gape is definitely less than on my TPE doll. As others have reported, the default anal opening is somewhat "relaxed" in it's default state. Hopefully this pic will help explain - legs are spread quite wide, but not the widest they'll go. When her legs are closer together, I've found the non-gaped opening takes a little "pop" to get in. The silicone feels firmer than the TPE based on my limited experience so far. Hope this helps.
- DocWen
- Doll Mentor
- Posts: 1561
- Joined: Sat Jun 06, 2020 3:27 pm
- Location: Under your bed! Boo!
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
I know you probably haven't been asked for pictures of this hole ( ) but would it be possible to get a picture of her back with the hole and with the silicone plug in place? I'm curious as to how it may or may not disturb the look of the doll.chindogu239 wrote: ↑Sun Feb 18, 2024 3:03 pm Doll specs/options: Tayu 158C+ w/#7-1 new Ivy, Soft, Oral; Light Pink skin w/Light Tan Areola and Labia; Default makeup; Implanted eyebrows; Dark Blue eyes; M16 head connector; Standard Joints; Hard Hands and Feet/No Studs; #1 Natural fingernails and Default toenails; #3 small wedge pubic hair; Fixed LH 13cm; Ultra soft everything; Back Hole.
(I know it the collage there is a picture of the back hole, but it's fairly small for my old eyes to see)
Then again, you may be busy with other holes so... all would be forgiven if you didn't. Ha!
DocWen
Never give up! Never surrender! - Jason Nesmith
Proud companion of Etsuko (MLW 148b) and Anjelica (XT Doll 163F)
Previous companion of SE Doll 151e, WM 157b, Piper Doll Phoebe, Piper Doll Phoebe Elf, another WM 157b, Zelex 155c, Happy Doll Dagmar and a few others I don't recall.
-
- Apprentice
- Posts: 14
- Joined: Wed Jan 03, 2024 3:57 pm
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
here you go (factory pic). Depending on the wig, the back hole may not be visible during use. As for other holes, had to take a break for a while. she's insatiable!DocWen wrote: ↑Thu Feb 22, 2024 7:37 pmI know you probably haven't been asked for pictures of this hole ( ) but would it be possible to get a picture of her back with the hole and with the silicone plug in place? I'm curious as to how it may or may not disturb the look of the doll.chindogu239 wrote: ↑Sun Feb 18, 2024 3:03 pm Doll specs/options: Tayu 158C+ w/#7-1 new Ivy, Soft, Oral; Light Pink skin w/Light Tan Areola and Labia; Default makeup; Implanted eyebrows; Dark Blue eyes; M16 head connector; Standard Joints; Hard Hands and Feet/No Studs; #1 Natural fingernails and Default toenails; #3 small wedge pubic hair; Fixed LH 13cm; Ultra soft everything; Back Hole.
(I know it the collage there is a picture of the back hole, but it's fairly small for my old eyes to see)
Then again, you may be busy with other holes so... all would be forgiven if you didn't. Ha!
- DocWen
- Doll Mentor
- Posts: 1561
- Joined: Sat Jun 06, 2020 3:27 pm
- Location: Under your bed! Boo!
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
That doesn't look bad at all. Not any more jarring than the seam where the head meets the neck. Less so, even.chindogu239 wrote: ↑Fri Feb 23, 2024 3:49 pm here you go (factory pic). Depending on the wig, the back hole may not be visible during use.
Very interesting. Thank you!
Remember to hydrate!As for other holes, had to take a break for a while. she's insatiable!
DocWen
Never give up! Never surrender! - Jason Nesmith
Proud companion of Etsuko (MLW 148b) and Anjelica (XT Doll 163F)
Previous companion of SE Doll 151e, WM 157b, Piper Doll Phoebe, Piper Doll Phoebe Elf, another WM 157b, Zelex 155c, Happy Doll Dagmar and a few others I don't recall.
Re: 158C+ Ivy Preview Follow-up w/Pics
She's beautiful
Check us out today! I guarantee you won't be disappointed
Website:
https://sxdolled.com/
https://sxdolled.com/collections/sex-dolls
E-mail:
info@sxdolled.com
Follow SxDolled On: Instagram | Twitter | Pinterest | Discord
Re: 158C+ Ivy Preview Follow-up w/Pics
It is really helpful, best picture I've seen so far, thanks.chindogu239 wrote: ↑Mon Feb 19, 2024 2:13 pmThe vagina gape is definitely less than on my TPE doll. As others have reported, the default anal opening is somewhat "relaxed" in it's default state. Hopefully this pic will help explain - legs are spread quite wide, but not the widest they'll go. When her legs are closer together, I've found the non-gaped opening takes a little "pop" to get in. The silicone feels firmer than the TPE based on my limited experience so far. Hope this helps.
Best LHP and realistic gape I have ever seen on a silicone doll, well done
The only thing missing from Tayu now is heating.
-
- Contributing Poster
- Posts: 33
- Joined: Sun Aug 14, 2022 2:32 pm
- Contact:
Re: 158C+ Ivy Preview Follow-up w/Pics
Aurora 2.0 (Tantaly torso doll) (Jan, 2024) Great with VR porn!
-
- Contributing Poster
- Posts: 35
- Joined: Sat Feb 10, 2024 10:54 am
- Contact: