Coeros: Dual function Sex Doll Stand

[Coeros]

https://www.coeros.com/product/dual-fun ... oll-stand/

Hope this sex doll stand can solve the display problem of your doll.

The sex doll stand is specially designed to display your doll, it is convenient for the doll to stand, care and change clothes, its cloth cover is thick and soft, and will not damage the doll.

There are two types of sex doll stands, one has the single function of supporting the crotch, and the other has the dual function of clipping the waist and supporting the crotch.

[Coeros]

How to use the crotch single stand:

Lower the stand height slightly, then place your sex doll directly above the stand.
Spread your sex doll’s legs slightly apart, then raise the stand to support the crotch, having the saddle rest flush against the crotch, and tighten the adjustment screws.
Finally adjust your sex doll’s posture to the desired position.

How to use the waist double stand:

Adjust the height of the stand to support your sex doll’s waist or underarm
Adjust the position of your sex doll’s heels and place your sex doll against the stand.
Utilize the included positioning/support belt for additional support.

[-Ragnar66-]

Cool things! I´d be (more) interested in something that remains invisible during photo shooting! Or at least something that can be easily selected (and then hidden or cut away) in a graphics app or green screened.

[Coeros]

Cool things! I´d be (more) interested in something that remains invisible during photo shooting! Or at least something that can be easily selected (and then hidden or cut away) in a graphics app or green screened.

Thanks!
The main reason why the Sex Doll Stand was designed at that time was to make it easier to hide or cut away the stand in the photo. Then we are currently designing a more dexterous stand, so stay tuned!

[-Ragnar66-]

Cool things! I´d be (more) interested in something that remains invisible during photo shooting! Or at least something that can be easily selected (and then hidden or cut away) in a graphics app or green screened.

Thanks!
The main reason why the Sex Doll Stand was designed at that time was to make it easier to hide or cut away the stand in the photo. Then we are currently designing a more dexterous stand, so stay tuned!

Even cooler then! I guess many users would be interested in something like that!

[Dastardlydave]

Looks nice and handy like it would be easy to store when not in use how much does it cost for each stand

[Coeros]

Looks nice and handy like it would be easy to store when not in use how much does it cost for each stand

There are two specifications of this stand, the price is $139.80 and $169.80.
Of course, every TDF customer has a coupon, and everyone can private message me before buying.

[Dastardlydave]

Looks nice and handy like it would be easy to store when not in use how much does it cost for each stand

There are two specifications of this stand, the price is $139.80 and $169.80.
Of course, every TDF customer has a coupon, and everyone can private message me before buying.

ok thanks coero

[Coeros]

Looks nice and handy like it would be easy to store when not in use how much does it cost for each stand

There are two specifications of this stand, the price is $139.80 and $169.80.
Of course, every TDF customer has a coupon, and everyone can private message me before buying.

ok thanks coero

You are welcome. If you have any questions about the doll in the future, you can contact me.

[Coeros]

Dolls over 160cm will be delivered with a large saddle.

[Nanako]

Cool things! I´d be (more) interested in something that remains invisible during photo shooting! Or at least something that can be easily selected (and then hidden or cut away) in a graphics app or green screened.

Thanks!
The main reason why the Sex Doll Stand was designed at that time was to make it easier to hide or cut away the stand in the photo. Then we are currently designing a more dexterous stand, so stay tuned!

When will this new style stand be available, and how does it differ from your current model? I was considering ordering one now, but wonder if I shouldn't wait to see if the new model represents a significant improvement before doing so.

[Coeros]

Hi, the new Stand was released last week and we also wrote a blog post: How to Assemble and Use the Sex Doll Electric Stand.

[Vicvic]

With another user, Maeva, we bought and tested the dual function stand. We did a short technical review. The current usage time is about two months, so we will update this review based on what we find in a few months.
The publication was developed without any connection to the Coeros company, but with their permission for publication.

Please take into account that the authors are French and that we used DEEPL for the translation.

TEST OF THE COEROS DOLL SUPPORT

Authors : Maëva, Victor123
07-03-2023

1/ General presentation

We are dealing with a doll support. It is an object to help a doll able to stand on its feet to maintain itself upright and which allows the securing of the vertical station. It is not a matter of hanging it and supporting all its weight, as on some commercial dollstands or made by DOs. It is like putting it against a wall but in a much more secure, elegant and presentable way.

It is a metal stand, which can be used in two ways:

- By supporting it on the back;

- By holding it by the crotch.

2/ Technical presentation of the support

The support is composed :

- A rather thick, heavy and solid ground plate which was rather a good surprise. It has two holes according to the desired support function.

Self-adhesive felt pads are provided to avoid direct contact of the metal with the floor.



- A curved metal piece, covered with a removable padded cover. Both are of good quality.

- Two interlocking rods and two screws that hold them together. The metal base is wider (9cm) than the picture would suggest. This is good news for strength when using in back support mode as there is good leverage applied there. The metal is quite strong and a bit flexible which prevents it from bending.

- A curve piece, used to join the vertical tube and the back support/saddle. It too is well made.

- A belt to hold the waist of the doll. It is a wide and very adhesive velcro band, which goes behind the saddle, then on each side in a buckle, and comes to be scratched in front of the doll. It can only be used to hold the doll in position, and not to reinforce its stability. Indeed, the functioning of the support is based on the weight/counterweight principle. The weight of the doll transmitted to its feet is the counterweight for the force applied at the level of the doll's waist which would try to make the plate tilt backwards. So if the doll goes forward it will fall no matter what. With the exception of very light dolls that could hold on if the tilt remains very low due to the weight of the plate on the floor.
All this led one of the testers (Maëva) to use a 15 degree backward angle for the beginning. Eventually, after this initial period, the backward angle was reduced to a much smaller value. Also at the beginning, you have to spread your legs a bit for lateral stability.


- Tools
The tools to mount the bracket are provided (a screwdriver and an allen key).

Remarks:

Regarding the saddle :
With a doll larger than 160cm, you should take the large saddle/support option as recommended on the product page. With the model for dolls under 160cm, the saddle/stand is a little shorter and a little more curved.
But even with the large model, the shape of the saddle/stand makes it difficult to perfectly fit the back of dolls with a waist measurement of more than 50cm. For example, it is good for a VM 166C with a waist of 50.

Concerning the rods :
The manufacturer could have designed them a little longer. With the VM 166C, we are at the limit. Indeed, you should not force the maximum height of the rods because they are nested. The rods are hollow and therefore if we force on the end with the two fixing screws, the end of the inner rod could twist. However, this did not happen in our tests. It is therefore preferable to leave some play to use the rigidity of the metal once away from the end.
As for any doll stand, the whole thing has, once mounted and with the doll leaning on it, a certain flexibility, but this does not disturb the solidity or the stability of the device.

Concerning the solidity :
The ground support and the saddle are very solid.
As said above, the disc in contact with the base is well made. As is what we assume to be the weld with the stem (or is it made of a block?). After more than a month of use by pressing a headstock backwards at 15° the support has not been damaged or bent. As you can see on the picture, the foot was a bit backwards during this initial period.

Concerning the use in saddle mode :
The reader's attention should be drawn to the use of this mode. Indeed, it is not advisable to put part of the doll's weight on the crotch and the perineum, as this could lead to a risk of damage. This use must be restricted to an aid to secure the standing position.


3/ Opinion and conclusion

This paragraph is the synthesis of the two testers' opinions (Maëva and Victor123)

After a long time looking for the right support to keep our dolls standing, we are satisfied with this model which combines solidity and aestheticism.

Standing supports have been made by DOs. They are often very solid but lack aestheticism and discretion.

Notably with this stand, the extra-flat metal base is easily camouflaged for shooting, as is the rod and even the belly band, when in use.

Points for Improvement:


- Have longer stems and therefore also stronger and stiffer. Especially the inner stem, which is under the pressure of the adjustment screws;


- To offer an option of having a curved plate for a use only back support but being able to marry the back of dolls having a waist measurement higher than 50cm

To finish, here are :

- Some détail pictures :

- Some pictures of the support in action with one of our dolls:

Addenda (15-03-2023)

- Following the exchanges concerning this report on the french LoveDollsForum, we add a remark : It is not recommended to put a doll equipped with metal holding screws on the floor plate, without shoes or protection, because of the risk of scratching or even interaction between the metal of the support and the metal of the doll's skeleton. It would be helpful if the manufacturer or dealer would add a notice to their product with this remark.

- The packaging of the product for shipping is serious. However, the weight and dimensions of the floor plate would require more reinforcement of the packing carton. The plate on one of the tested stands arrived slightly bent at one corner. Upon notification, the supplier sent a replacement plate free of charge.

[Nanako]

Thanks to you and your friend, Vicvic, for this useful and comprehensive
review of the Coeros stand. I ordered one a few days ago, and am happy
to know you think so highly of it. I'll be looking forward to receiving it,
and will let you know of my own experiences with it.

Cheers!

[Vicvic]

Thanks to you and your friend, Vicvic, for this useful and comprehensive
review of the Coeros stand. I ordered one a few days ago, and am happy
to know you think so highly of it. I'll be looking forward to receiving it,
and will let you know of my own experiences with it.

Cheers!

Thank you! Yes, we'll be happy to exchange our respective impressions on this product.