My first doll - WM L118
My first doll - WM L118
Long story short, I'm a big BBW fan and I was convinced to get a full size BBW as my first doll. At some point in time, due to multiple reasons (huge delay required to get a doll made to order from China - we are talking about at least 2 months - and also weight related concerns) I decided to start with a smaller and lighter doll that I could get off stock from a seller within the EU. Full size BBW will no doubt follow after I get used to handling dolls in general.
So here she is, WM Dolls L118 body + head 263. Bought from TDF approved vendor docklandet.se - they had it in stock, she arrived at my doorstep on Jan 23.
To my best understanding, there are actually 2 different WM 118cm bodies. There is a much thinner (and also lighter) doll that everyone around here seems to be referring to as "WM 118". This however is the thicker one, L118 as designated on the box. Since I found no topic discussing the WM L118 body on this forum, I figured I'd create my own. I will occasionally add more pictures of her.
Enjoy!
-
- Active Poster
- Posts: 58
- Joined: Tue Apr 18, 2023 5:03 pm
- Contact:
Re: My first doll - WM L118
Is there junk in the trunk? Would a doggy style pic be possible?
How's her LHP? I'd like to know more about this doll.
Re: My first doll - WM L118
Congrats on your new girl dreamr!
Check us out today! I guarantee you won't be disappointed
Website:
https://sxdolled.com/
https://sxdolled.com/collections/sex-dolls
E-mail:
info@sxdolled.com
Follow SxDolled On: Instagram | Twitter | Pinterest | Discord
Re: My first doll - WM L118
About the LHP I'm not sure I can judge accurately because I don't own any other doll to compare it to.Peckerwreker wrote: ↑Thu Jan 25, 2024 8:15 pm She's a beauty.
Is there junk in the trunk? Would a doggy style pic be possible?
How's her LHP? I'd like to know more about this doll.
Definitely I've seen worse (this doll is way better than my torso in this regard). Judging by what I see in various pictures around here, I wouldn't qualify it as good either.
To give you an idea I placed the doll with her chest resting on a pillow and arched her back. Here is what it looks like.
In this particular position the vag hole is going straight - not up, not down. The butt hole is going slightly upwards.
I'd say her butt hole is placed incorrectly.
FWIW I'm not a fan of doggy style (but I am am fan of reverse cowgirl, which IMO has similar requirements about LHP - and in that position it works just fine for me).
- just a guy
- Doll Mentor
- Posts: 1139
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland 🇫🇮
- Contact:
Re: My first doll - WM L118
Good LHP helps with doggy style with cowgirl it doesn't that much.
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
Pedicure time
I read on this forum somewhere that it's best to prepare the nails while they are detached, then attach them to the doll.
The thing is, I could not easily detach her existing toenails - they seem to be well glued. So I sat and thought about this for a while contemplating what's the best course of action. In the end, I decided not to risk damaging her toes by putting too much force when trying to remove the nails, but rather to paint them while they are attached, masking the area around them in order to not to get any nail polish on the TPE material.
Although we have beautiful "permanent" type nail lacquers that needs curing in an UV lamp, I decided not to use them on this project as I was unsure if the UV lamp would cause any damage to the TPE, so I went with a standard air-dry lacquer instead.
Was it a good thing to proceed this way - I don't know, maybe time will tell. In the end I think I did not do any damage and I am very pleased with the result so far.
If any of you are disgusted by toenails and/or do not like seeing them, please look away now - for I am about to cover in detail the process that I used.
First step was to very lightly file the tips of her toenails, taking care not to touch the TPE material with the file. This was needed to make their shape a little bit more to my liking (I couldn't do too much however, as they were kind of short to begin with) and to eliminate some rough edges from the production process.
Second step was to apply the masking tape. This worked out well in the end. Third step was to apply the first coat of nail polish. I chose a dark red nuance for this project, which I particularly like in combination with some lighter red nail glitter. 4th step was a second coat of the red nail polish. Typically I only use 2 coats of this polish when doing my wife's nails however in this particular application I felt the need to apply a 3rd coat as the 5th step. For some reason the macro function in combination with the phone flash reveals even the slightest imperfections. The whole thing looked so much better in person, that appears in the photos!
6th step is a first coat of the light red glitter 7th step was a second coat of glitter 8th step which was a first clear coat, brings a much needed shine: Finally the 9th step is a second clear coat, which I don't typically apply, but in this application I felt the need to cover some imperfections.
The end result, after carefully removing the masking tape:
I then repeated the whole process on her left leg. My poor ol' body was starting to hurt, apparently I did not choose the best position to perform this task. Here she was asking me to get back down and finish the job !
As I said, so far I am very pleasead with the end result.
Why so many layers? Because taking pictures to document the process revealed to me so many imperfections. Also, I want this to last for a long time. Absolutely I expect that I will need to re-apply a layer of top coat from time to time, in order to restore the shine.
more stuff
Also we got another wig, which sadly is not what I was hoping for (poor quality and also too large for her head), but it will have to do for now.
Still TODO:
- her fingernails. This will be more complicated because the current ones are ridiculously wide (in relation to her fingers) and this absolutely needs fixing.
- give her a name!
- just a guy
- Doll Mentor
- Posts: 1139
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland 🇫🇮
- Contact:
Re: My first doll - WM L118
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon