Elsa Babe 160cm L-cup REVIEW
-
- Senior Member
- Posts: 477
- Joined: Mon Jan 09, 2023 1:08 pm
- Location: UK
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Can you open up the photo I don't understand it?DarkMind1982 wrote: ↑Mon Mar 04, 2024 12:21 am I have an idea how this could be fixed:
1. socket wrench head for that nut
2. epoxy glue for metal
3. a bit of drilling work
4. may be some turning work
picture here:
repair_idea.png
Epox I can buy and I have metal drill so drilling onto metal isn't a problem.
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
It will be my last doll from them too. Really a shame since I had some dolls in minds.chippyminton wrote: ↑Mon Mar 04, 2024 3:37 am I can’t believe that both a manufacturer and a vendor could just abandon a customer with a 4-month-old $2500 product which is broken. It’s a really shitty thing to do. I can’t think of a single other instance where ‘tough shit’ would have been the answer. I’ve been following this thread because I was seriously thinking about ordering. Unsurprisingly - EB won’t be getting my money.
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
- Elsa Babe_Young
- Manufacturer Affiliated
- Posts: 1170
- Joined: Thu Jan 07, 2021 4:01 am
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
- Elsa Babe_Young
- Manufacturer Affiliated
- Posts: 1170
- Joined: Thu Jan 07, 2021 4:01 am
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Problems might occur during the lifespam of a doll and repair might be needed but after 4 months being left with no warranty on such an issue is really awful considering one spent something around 2.000,00 USD for this product. Had it happened to me it would be a serious problem and I'd consider it as if I've been robbed...
chippyminton wrote: ↑Mon Mar 04, 2024 3:37 am I can’t believe that both a manufacturer and a vendor could just abandon a customer with a 4-month-old $2500 product which is broken. It’s a really shitty thing to do. I can’t think of a single other instance where ‘tough shit’ would have been the answer. I’ve been following this thread because I was seriously thinking about ordering. Unsurprisingly - EB won’t be getting my money.
- DarkMind1982
- Senior Member
- Posts: 400
- Joined: Fri Jun 17, 2022 2:58 pm
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Made this drawing in a hurry in the morning. Here explanation. 1. tube on the left side in your videojust a guy wrote: ↑Mon Mar 04, 2024 3:45 am Can you open up the photo I don't understand it?
Epox I can buy and I have metal drill so drilling onto metal isn't a problem.
2. socket wrench you will put inside the tube (may need some work on lathe or any other similar process)
3. nut on the right side of your video
4. drill
Procedure:
1. prepare wrench head (may be on lathe) to be put inside the tube
2. the head of the wrench should fit snugly onto the nut ( preferable)
3. file all sharp edges
4. when 1,2,3 are ready put the glue on the nut and fit wrench head on the nut
5. when the glue hardens put the glue on the wrench head and fit the tube on it
6. for better fix drill a hole through the tube-wrench head-nut for any metal pin
7. put the pin inside this hole
Remark: i don't know whether nut and stud are hardened (that can make processing troublesome). Check it with metal file.
- Elsa Babe_Young
- Manufacturer Affiliated
- Posts: 1170
- Joined: Thu Jan 07, 2021 4:01 am
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Re: Elsa Babe 160cm L-cup REVIEW
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
DarkMind1982 wrote: ↑Mon Mar 04, 2024 1:40 pm Made this drawing in a hurry in the morning. Here explanation.
1. tube on the left side in your video
2. socket wrench you will put inside the tube (may need some work on lathe or any other similar process)
3. nut on the right side of your video
4. drill
Procedure:
1. prepare wrench head (may be on lathe) to be put inside the tube
2. the head of the wrench should fit snugly onto the nut ( preferable)
3. file all sharp edges
4. when 1,2,3 are ready put the glue on the nut and fit wrench head on the nut
5. when the glue hardens put the glue on the wrench head and fit the tube on it
6. for better fix drill a hole through the tube-wrench head-nut for any metal pin
7. put the pin inside this hole
Remark: i don't know whether nut and stud are hardened (that can make processing troublesome). Check it with metal file.
This doesn't seems so hard so I will test this when I gots the time
Thanks alot!
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
Re: Elsa Babe 160cm L-cup REVIEW
Elsa Babe's 160cm Medium (Sakai) or 148cm Large (Takanashi)
Bezlya 2.1 155cm / Holly? Maybe?
Firefly Diary 159cm / Lian
Irontech's 153cm / S24 Miyuki
- just a guy
- Doll Mentor
- Posts: 1023
- Joined: Tue Apr 25, 2023 3:36 pm
- Location: Finland
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
I will update the progress of the repair when I have time to do it. I also have metal saw so I can buy some metal rod that I can use to lock the bone pipe to the bolt after I have first drilled a hole through them. I also propably going to buy epox and hose clamp to lock the metal rod lock in place and then cover the whole are with epox. The wrench socket costs around 7 euros and epox around 20 euros. So about 30 euros will go to the expenses materials. The epox will be critical on this since so much force is going to be around the bolt and the lock rod so I have to find strongest possible metal epox. I have already found few, but will do some research if I can find out which one will the best for this.
I already have drill with metal drill set and metal saw. Also have metal file and other tools like pliers so I don't have to buy any tools to do this job.
I have also Pm with Elsa Babe and they have promised me new doll so thanks for that Elsa Babe. I'm still trying to fix this one though since it would be a waste to throw it away not at least trying to fix it first.
Review of my Monica Hentai Torso Doll - viewtopic.php?t=169345
Review of my Elsa Babe 160cm L-cup - viewtopic.php?t=172708
Best way to clean a doll
Best way to dry a doll
Where to buy doll clothes
After honeymoon
- 4891d
- Doll Oracle
- Posts: 9747
- Joined: Tue May 11, 2021 1:38 pm
- Location: Where I feel good.
- Contact:
Re: Elsa Babe 160cm L-cup REVIEW
Good news!just a guy wrote: ↑Wed Mar 06, 2024 6:20 am ...
I have also Pm with Elsa Babe and they have promised me new doll so thanks for that Elsa Babe.
Saaskiya, my beautiful gift (Zelex GE04) : viewtopic.php?t=154462
Trixie came to me (Funwest Dolls Trixie) : viewtopic.php?t=155900
Eurydice, a nice surprise (Elsa Babe RHC019)